MP925-30.0K-1%

Series:	Kool-Pak®MP900
Packaging:	Tube
Part Status:	Active
Resistance:	30 kOhms
Tolerance:	±1%
Power (Watts):	25W
Composition:	Thick Film
Features:	Moisture Resistant, Non-Inductive
Temperature Coefficient:	-20/ +80ppm/°C
Operating Temperature:	-55°C ~ 150°C
Package / Case:	TO-220-2
Supplier Device Package:	TO-220
Size / Dimension:	0.410" L x 0.125" W (10.41mm x 3.18mm)
Height - Seated (Max):	0.650" (16.52mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistors

Through hole resistors are components that are mounted with leads that protrude through holes on a printed circuit board. Through-hole resistors are often single lead components that are soldered into place and can be connected to other components to provide electrical resistance. Through hole resistors are similar to surface mount resistors and many of the same principals apply to both types of resistors.

The MP925-30.0K-1% Application Field and Working Principle

The MP925-30.0K-1% resistor is a through hole resistor, meaning it is soldered into place on a printed circuit board. This type of resistor can be used in a variety of applications, such as audio equipment, medical devices, automotive, and industrial equipment. It is designed for use in high voltage and high current applications.This resistor is made up of metal film and ceramic coatings. The metal film is made from a combination of two or more different metals and is used to create the desired resistance value for the component. The ceramic coating acts as an insulator and protects the metal film from moisture and other environmental elements.The working principle of the MP925-30.0K-1% resistor is based on the principle of Ohm\'s Law. This states that voltage (V) is equal to current (I) multiplied by resistance (R). In other words, the resistance value of a component, such as the MP925-30.0K-1% resistor, determines how much current can pass through it. This is what allows the resistor to control the amount of current that passes through a circuit.The resistance value of the MP925-30.0K-1% resistor is 30,000 ohms, with a maximum power rating of 1 watt. This is a relatively low resistance value and therefore it is suitable for use in high current applications.

Conclusion

The MP925-30.0K-1% through hole resistor is a versatile component that can be used in a variety of applications, including audio equipment, medical devices, automotive, and industrial equipment. Its resistance value of 30,000 ohms and maximum power rating of 1 watt makes it suitable for use in high current applications. The working principle of this resistor is based on the principle of Ohm\'s Law, which states that voltage is equal to current multiplied by resistance. By understanding the application field and working principle of the MP925-30.0K-1% through hole resistor, engineers and designers can ensure that they obtain the desired results for their circuit design.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description