MPC8548CVTAUJC

Ethernet:	10/100/1000 Mbps (4)
Base Part Number:	MPC8548
Additional Interfaces:	DUART, I²C, PCI, RapidIO
Supplier Device Package:	783-FCPBGA (29x29)
Package / Case:	783-BBGA, FCBGA
Security Features:	--
Operating Temperature:	-40°C ~ 105°C (TA)
Voltage - I/O:	1.8V, 2.5V, 3.3V
USB:	--
SATA:	--
Series:	MPC85xx
Display & Interface Controllers:	--
Graphics Acceleration:	No
RAM Controllers:	DDR, DDR2, SDRAM
Co-Processors/DSP:	Signal Processing; SPE
Speed:	1.333GHz
Number of Cores/Bus Width:	1 Core, 32-Bit
Core Processor:	PowerPC e500
Part Status:	Obsolete
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Embedded - Microprocessors: MPC8548CVTAUJC Application Field and Working Principle

The MPC8548CVTAUJC is the microprocessor used widely in the embedded market that is becoming an increasingly important area of electronics and embedded systems. It is an 8-bit single chip system that includes a wide range of features such as a highly scalable architecture, advanced embedded computing capabilities, and low power consumption.The MPC8548CVTAUJC is a microprocessor aimed for the embedded market that uses Power Architecture. Power Architecture is a family of RISC instruction set architectures developed and marketed by IBM, Motorola, and Freescale. It is a scalable architecture meaning that all models/variants use the same core instruction set, and offer the same programming model. This makes it suitable for a wide range of applications-such as embedded computers in consumer electronics, mobile phones, office equipment, memory and storage, networking hardware and navigation systems.The MPC8548CVTAUJC is designed for general-purpose embedded applications requiring high performance with very low power consumption. It contains enhanced PowerPC 40 core that can operate at up to 866 MHz and a flexible and efficient programmability and DSP engine. The MPC8548CVTAUJC also contains a Rapid I/O system, which provides fast and low latency data transfers over a high-speed system interconnect.The rapid I/O system utilizes a system of point-to-point electrical connections between the various components of the processor system. This system of high-speed low latency data transfers is critical for embedded system applications because it provides higher performance than traditional bus systems. It also provides power savings and reduced system latency, which makes it ideal for high-performance embedded applications. The MPC8548CVTAUJC is a single-core processor and it is built on a 65nm process technology. This makes it well-suited for embedded applications because it offers increased performance, low power consumption, and a longer battery life.The MPC8548CVTAUJC comes with an array of specialist peripherals, which are critical for most embedded applications. These include an integrated LCD controller, real-time clock, USB 2.0 on-the-go host, Wi-Fi and Bluetooth connectivity, and an MPEG 4 decoder. This makes it well suited for applications such as digital television receivers, information kiosks, consumer electronics and automotive control systems.The MPC8548CVTAUJC has also integrated several features, which provide advanced embedded computing capabilities. These include a DSP engine, trace buffer, exception management unit, and a memory-mapped instruction and data access. The DSP engine offers dedicated pathways for DSP operations and features a programmable accumulator for increased performance. The trace buffer can store up to 32KB of trace entries that enable debugging, system testing, and performance optimization. The exception management unit offers advanced error management and system mode switching capabilities. The MPC8548CVTAUJC is also designed to enable low power consumption. This is achieved through the use of power saving technologies such as clock gating, dynamic voltage regulation, and power management. Clock gating is the process of reducing the frequency of the processor clock to reduce the amount of power being used. Dynamic voltage regulation allows the power supply voltage to be adjusted dynamically, to reduce power consumption when the processor is idle. Power management allows the processor to enter into a low power “sleep” mode when not in use, and to wake up when needed. This reduces the amount of power being used during periods of inactivity. In conclusion, the MPC8548CVTAUJC is a single-chip 8-bit microprocessor that is well-suited for embedded applications. Its features include a high-performance PowerPC embedded processor core, scalable architecture, embedded computing capabilities, trace buffer, exception management unit, and power-saving technologies. It is suitable for a wide variety of embedded applications, from digital television receivers, to consumer electronics, and automotive control systems. Its features, power efficiency, and low power consumption make it a cost-effective solution for the embedded market.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description