MPLAD36KP30CAE3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Diodes, such as the MPLAD36KP30CAE3, are widely used components in circuit protection systems. The function of a TVS diode is to provide a clamping action to any transient voltages that may be present in a circuit. In this article, we will look at the application field and working principle of the MPLAD36KP30CAE3.

TVS diodes are typically used in circuits that are subject to flows of current into and out of the circuit in response to transient voltages. This can include the application areas of communications, computers, automotive electronics, or industrial applications.

In terms of application fields, the MPLAD36KP30CAE3 is applicable to power supplies, clamps, and data lines. It provides integrated protection and low capacitance. For power supplies, the TVS diode is designed to protect the circuit against overvoltage transients. It also protects against inductive and capacitive switching transients. For clamping applications, this device is designed to limit the clamping voltage to a certain level. Finally, for data lines, the TVS diode is designed to protect high speed data lines from ESD pulses and other transient effects.

The working principle of the MPLAD36KP30CAE3 is based on its structure. This device is constructed from two back-to-back Zener diodes. The Zener diodes are placed near the transient voltage source. The purpose of the Zener diodes is to allow the breakdown voltage of the Zener to be clamped and not be allowed to rise above the Zener voltage level. This also helps protect the circuit from the overvoltage transients.

The device also incorporates the use of FETs. The FETs are connected to the drain of each Zener diode. The FETs act as a switch and when triggered, the FETs divert current away from the Zener diode and protect the circuit from further harm.

The MPLAD36KP30CAE3 also incorporates a surge suppressor into its structure. The surge suppressor is designed to reduce the risk of damage by limiting the transient voltage passes. It also helps reduce the amount of current that is allowed to flow through the circuit. The surge suppressor also moves current away from the sensitive components, thus increasing the overall protection of the circuit.

In conclusion, the MPLAD36KP30CAE3 is an integrated circuit used for protecting power supplies, data lines, and clamping applications. It incorporates two back-to-back Zener diodes that help to clamp the voltage and protect the circuit from transient voltages. It also uses FETs and a surge suppressor to reduce the amount of current and transient passes.

The specific data is subject to PDF, and the above content is for reference