MPM01

DC-DC converters are widely used to convert a direct current (DC) to a different direct current. The MPM01 application field and working principle focuses on voltage boost. The MPM01 boosts a very low voltage (Vin) to a higher voltage (Vout). The micro-power module MPM01 will maintain a stable Vout while Vin varies from 0.4V to 3.6V. The MPM01 application consists of two main components: the pulse width modulation controller and the amplifier stage.The pulse width modulation (PWM) controller is the first component of the MPM01. It consists of three parts: an oscillator, clock divider circuit, and a comparator. The oscillator generates a square wave, and the clock divider circuit receives a higher frequency from the oscillator and reduces its frequency. The reduced frequency is then compared with the reference voltage in the comparator. This comparison allows the PWM signal to have varying duty cycles.The amplifier stage of the MPM01 is responsible for boosting Vin and providing the regulated Vout. It consists of two parts, an NMOSFET switch and an inductor, connected in series. The NMOSFET acts as an on/off switch, turning the current on/off based on the PWM signal from the controller. The inductor then stores energy during the on state. The voltage is then boosted based on the energy stored in the inductor and the duty cycle of the PWM signal. The voltage is then regulated with a feedback loop in order to keep the output voltage constant. The working principle of the MPM01 is to convert a low voltage (Vin) to a higher voltage (Vout). A PWM signal in the controller is used to control the on/off state of the NMOSFET switch. The inductor stores energy during the on state and then releases the energy to boost the voltage. A feedback loop is used to regulate the output voltage and keep it constant.The MPM01 has a wide range of applications. It can be used to provide a constant voltage output, or used in voltage boost circuits. It is useful for applications such as powering low power mobile devices, LED displays, or other low power electronic devices. It is also useful for portable power sources such as laptop batteries or solar panels.The MPM01 is an efficient and low cost solution for DC-DC conversion applications. It is easy to configure, making it an ideal choice for a wide range of applications.

MPM0527SJ	Tamura	11.04 $	84	POWER MODULE (5V; 2.7A)En...
MPM01	Sanken	0.0 $	1000	DC DC CONVERTER 1.8-12V 3...
MPM04	Sanken	0.0 $	1000	DC DC CONVERTER 12-24V 72...