MPM8001AT1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A resistor network is an arrangement of multiple resistors connected together, in order to provide an electrical resistance in the circuit. It can be used in many applications, such as for signal conditioning or for power supply. The MPM8001AT1 resistor network is generally used in multiplexer circuits, which are used to divide a signal into multiple paths, depending on the application. This article will provide a brief overview of the MPM8001AT1 application field and working principle.

The MPM8001AT1 is used in multiplexer circuits as a 3-bit resistor array, with a 3-way capacitive array. It provides an input impedance of 5.6 kilohms and a voltage gain of 20 dB. The 8-pin chip has two sides: the one with four pins is the array side, while the four pins on the other side are the output terminals. The midpoint of the output is the input voltage, while the three other output pins are the outputs from the various resistors in the array.

The MPM8001AT1 is a digital switch that is highly reliable and provides a very low impedance. It is typically used in multiplexer circuits, which are used to divide a signal into multiple paths, depending on the application. In such circuits, the MPM8001AT1 is used to switch between the various paths, as well as to direct the signal to the correct output pin.

The working principle of the MPM8001AT1 is similar to that of an analog switch. It is a three-bit resistor array with a 3-way capacitive array. Depending on the state of the input, either one of the three resistors is connected to the output pin, or all three are connected. The state of the input is determined by the logic level of the control line.

The MPM8001AT1 is a highly reliable digital switch that provides a low impedance and has a low power consumption. It is also very efficient, as it can switch rapidly and reliably. It is widely used in multiplexer circuits for its ability to divide a signal into multiple paths, dependent upon the application.

The MPM8001AT1 is a 3-bit resistor array with a 3-way capacitive array. It has an input impedance of 5.6 kilohms and a voltage gain of 20dB. It is highly reliable and can switch between the various paths, as well as to direct the signal to the correct output pin. The three pins of the array side are the input, control line, and output pin, respectively. The midpoint of the output is the input voltage, while the three other output pins are the outputs from the various resistors in the array.

The MPM8001AT1 is an ideal choice for multiplexer circuits, as it is highly reliable, low impedance, and efficient. It is relatively easy to use, as the logic level of the control line determines the state of the input. Its low power consumption also makes it ideal for power supply applications.

The specific data is subject to PDF, and the above content is for reference