MPMT5001BT1

Number of Pins:	3
Height - Seated (Max):	0.040" (1.02mm)
Size / Dimension:	0.113" L x 0.051" W (2.86mm x 1.30mm)
Supplier Device Package:	SOT-23
Package / Case:	TO-236-3, SC-59, SOT-23-3
Mounting Type:	Surface Mount
Applications:	Voltage Divider (TCR Matched)
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±25ppm/°C
Power Per Element:	100mW
Series:	MPM
Resistor-Ratio-Drift:	±2 ppm/°C
Resistor Matching Ratio:	±0.01%
Number of Resistors:	2
Tolerance:	±0.1%
Resistance (Ohms):	2.5k
Circuit Type:	Voltage Divider
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

:<p>Resistor networks and arrays are components that are made up of multiple resistors, usually connected in series or parallel. They are used as part of an electrical system to reduce current, increase voltage, or provide impedance, or resistance, to a circuit. One type of resistor array is the MPMT5001BT1, which is used in a variety of different applications.</p><p>The MPMT5001BT1 is a low-cost, surface-mount resistor array that is made up of five individual resistors. It is designed to provide a wide variety of resistance values in a small package. The five individual resistors are connected in a series and each has a different resistance value, giving the MPMT5001BT1 the ability to offer a wide range of resistance values.</p><p>The MPMT5001BT1 is most commonly used in applications where a certain amount of current needs to be reduced or where the impedance of a circuit needs to be increased. For example, in power supplies, the MPMT5001BT1 is used to limit the current draw of the system. This keeps the power supply from overloading and reduces the risk of electrical shorts. The MPMT5001BT1 is also used to increase the impedance of circuits, such as data lines, by adding a resistor array across the line. This reduces interference and crosstalk, allowing the signal to remain strong and stable.</p><p>In addition to current limiting and impedance increase, the MPMT5001BT1 is also used in applications such as filtering, signal conditioning, and voltage division. The resistor array is able to filter out unwanted signals and noise in a circuit, and to condition the signal from a device before it reaches any other components. The voltage division application of the MPMT5001BT1 is its ability to drop the voltage in a circuit, allowing for the voltage to be controlled by the user or used as a reference voltage in other components.</p><p>The working principles of the MPMT5001BT1 are quite simple. It is made up of five individual resistors, all of which are connected in series. As current flows through the resistors, the total voltage across the array can be determined by adding up the voltage drops across each individual resistor. By controlling the resistance value of each resistor, the voltage drop across the entire array can also be changed, allowing the user to control the amount of current or voltage in the circuit.t</p><p>In summary, the MPMT5001BT1 is a low-cost, surface-mount resistor array that is used for a variety of applications, such as current limitation, impedance increase, filtering, signal conditioning, and voltage division. It is made up of five individual resistors that are connected in series to control the voltage drop across the array. Understanding how the MPMT5001BT1 works will allow engineers to make better use of the resistor array and increase the efficiency of their systems.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description