MPQ2451GT-33-P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC (Power Management Integrated Circuit) is a kind of integrated circuit product that provides necessary power management control and power control functions to ensure the steady and optimum operation of the entire electronic system. DC DC switching regulators are one of the most common applications of PMIC. The MPQ2451GT-33-P is one such DC DC switching regulator.

MPQ2451GT-33-P is a step-down switching regulator designed to regulate output voltage from a minimum of 2.5V to a maximum of 5.5V. It is designed for use on a wide range of power management and system power requirements, such as automotive, consumer, industrial and telecom applications. The product can deliver up to 4A of current and has a switching frequency of 500kHz. It has a lower dropout than other linear regulators and is highly efficient. The device features overload protection and features a detect input for monitoring output current.

The MPQ2451GT-33-P works on a switching control principle and adopts synchronous rectification technology. The output voltage is controlled by a voltage feedback loop and two reference voltages. A control signal is generated from the feedback and reference, and this signal is used to generate the switching signal. The reference voltages are used to determine the switching frequency and to set the current limit. The output voltage regulation is obtained by buck-boost or buck-buck operation, depending on the brightness of the output.

When the output voltage is higher than the feedback voltage, the control signal drives the switch to cause a buck-boost cycle. During this cycle, the current is increased and when the feedback voltage is smaller than the reference voltage, the controller generates a switch-off pulse and the cycle is stopped. When the output voltage is lower than the feedback voltage, the switch-off pulse is generated when the feedback voltage is higher than the reference voltage. The switch-off pulse closes the cycle and the output voltage is then regulated until the reference voltage is reached again.

The MPQ2451GT-33-P is a very useful device for regulating output voltage in a wide range of applications. It has a fast start-up time of 250uS and low Iq/Io for high efficiency. The device has a high switching frequency of 500kHz which enables it to achieve high efficiency, and the built-in protection feature provides extra safety for the system. The low dropout voltage makes it suitable for powering low-volatge devices and the internal detector allows the device to monitor output current. Overall, the MPQ2451GT-33-P is an excellent device for regulating output voltage in a variety of power management and system power applications.

The specific data is subject to PDF, and the above content is for reference