MPQ4425MGQB-AEC1-Z

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MPQ4425MGQB-AEC1-Z is a power management integrated circuit (PMIC) specifically designed for LED drivers. It is specially developed for general lighting applications and drivers, providing features such as dimming, higher efficiency, and protection. This IC is powered by a low voltage input, ranging from 3 V to 36 V and can be used to drive up to 6 channels of LEDs. MPQ4425MGQB-AEC1-Z is a single stage step-down constant current LED driver with high power density.

The main components of the MPQ4425MGQB-AEC1-Z circuit are the high-voltage input power switch, the MOSFET switching regulator, and the Driving and Dimming circuits. During its normal operation, when the input power is turned on, the high voltage power switch is turned on and the MOSFET switching regulator is activated. The MOSFET switching regulator then converts the high voltage input to the necessary lower output voltage through a series of switching operations, to provide the LEDs with the required current.

The LED current is regulated through the LED controller, which is responsible for the dimming. The LED controller uses Pulse Frequency Modulation (PFM) to regulate the LED current. By varying the duty cycle of the PFM signal, the LED current can be adjusted to a desired level. The controller can operate in two modes: DC Mode, which provides a fixed current, and PWM Mode, which enables the user to vary the brightness of the LEDs.

The MPQ4425MGQB-AEC1-Z provides protection features such as over voltage protection, over load protection, and short circuit protection. It also has thermal derating protection by shutting down the LEDs when their temperatures reach specified values. Additionally, it comes with a fault indicator circuit, which informs the user of any faults that may have occurred.

In conclusion, the MPQ4425MGQB-AEC1-Z is a PMIC for LED drivers. It is designed for general lighting applications, providing dimming, higher efficiency, and protection. It is powered by low voltage, can be used to drive up to 6 channels of LEDs, and provides protection features such as over voltage, over load, and short circuit protection. It is a single-stage step-down constant current LED driver with high power density and has a fault indicator circuit.

The specific data is subject to PDF, and the above content is for reference