MPR20C2K2J

Series:	MPR, CGS
Packaging:	Bulk
Part Status:	Active
Resistance:	2.2 kOhms
Tolerance:	±5%
Power (Watts):	20W
Composition:	Thick Film
Features:	Flame Proof, Non-Inductive, Safety
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	TO-220-2
Supplier Device Package:	TO-220-2
Size / Dimension:	0.417" L x 0.177" W (10.60mm x 4.50mm)
Height - Seated (Max):	0.748" (19.00mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are electrical components designed to precisely control the flow of electricity in both AC and DC circuits. The MPR20C2K2J Through Hole Resistor is a common component in many applications due its high precision and cost-effective build. This resistor type is an especially important component in consumer electronics, machine tools, and other industrial devices.The MPR20C2K2J is wideband, non-inductive, and resistance-temperature coefficient-free. It boasts a relatively high resistance value—2K2 (2 kilo ohm)—fully adjustable from 500 Ohms to 2.2 Mohm, and a maximum power dissipation of 5 mW. It has various uses such as in timing, noise, and decoupling circuits.The MPR20C2K2J is a radial-lead resistor and also known as a through-hole resistor—a type of resistor connected to a circuit board or other support via two lead wires that protrude through a hole in the board. Through-hole resistors provide more reliable and higher power connections than equivalent surface mount components. In addition, because of their large size, this resistor type can dissipate more heat than a surface-mount alternative.The working principle of the MPR20C2K2J is fairly simple and efficient. It consists of a strip of electrically conductive material—typically carbon, metal, or metal oxide—surrounded by a non-conductive material such as glass, epoxy, or ceramic. The conductive material is etched or cut in such a way that it forms an isolation gap. When electrical current is passed through this gap, it generates heat, which increases in direct proportion to the current applied. This produces resistance to the flow of electricity, which is thus regulated. Through hole resistors are extremely robust and easy to install. They can handle both AC and DC current and voltage, and are often used for safety-related connections such as power points and door interlocks. Unlike surface mount resistors, through-hole resistors are well suited for applications requiring higher power dissipation or greater temperature range, since they are not susceptible to insulation failure due to voltage or temperature fluctuations. When selecting a through hole resistor, it is important to consider the available space, desired power handling capacity, and temperature range. The MPR20C2K2J through-hole resistor is a cost-effective and reliable component for applications requiring precise electrical current control, and because of its non-inductive and adjustable build, it stands as a stable and durable example of this resistor type.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description