MR106100R00TAE66

Series:	MR100
Packaging:	Bulk
Part Status:	Active
Resistance:	100 Ohms
Tolerance:	±0.01%
Power (Watts):	0.25W, 1/4W
Composition:	Wirewound
Features:	--
Temperature Coefficient:	±10ppm/°C
Operating Temperature:	-55°C ~ 145°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.250" Dia x 0.500" L (6.35mm x 12.70mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: MR106100R00TAE66 Application Field And Working Principle

Through hole resistors are components used in printed circuit boards (PCB) which are used to create electrical connections between components. These resistors are mounted on the board with leads in two holes of the board, hence the name. MR106100R00TAE66 is one of the most commonly used through hole resistors.

Application Field of MR106100R00TAE66

MR106100R00TAE66 is often used in power circuits — to limit current and reduce voltage. It can also be used to provide bias to transistors, and to reduce circuit noise. It is also used to compensate for fluctuations in supply voltage which can cause the circuit’s performance to vary.MR106100R00TAE66 is suitable for applications such as high-precision circuits, precision constant current sources, temperature control circuits, and precision voltage references. It is also used in circuits which require high precision and low noise, such as high-end radio transceivers and audio systems.

Working Principle of MR106100R00TAE66

MR106100R00TAE66 resistors are based on a simple principle. They are made of a metal wire which has a known resistance. When a current passes through it, some of the energy will be lost as heat. This heat is dissipated into the environment by the resistor.The resistance of the MR106100R00TAE66 is determined by the length of the metal wire and the cross-sectional area of the wire. The length of the wire determines the total resistance and the cross-sectional area determines the amount of current that can pass through the resistor.The resistance of a resistor can be measured with a multimeter. The resistance is measured in ohms and is usually stamped on the resistor. The standard unit of resistance is the ohm (Ω).When used in a circuit, MR106100R00TAE66 resistors will act as a current limiter, reducing the current to a safe level. It will also reduce the voltage supplied to the circuit, thus reducing the power consumption of the circuit. By limiting the current, the resistors also protect the semiconductor devices in the circuit from overload.

Conclusion

MR106100R00TAE66 is one of the most commonly used through hole resistors. It is suitable for precision circuits, such as high-end radio transceivers and audio systems. It is also used in power circuits to limit current and reduce voltage. Its working principle is based on a simple principle — the length of the metal wire and the cross-sectional area of the wire determines the resistance. When used in a circuit, it acts as a current limiter, reducing the current to a safe level and protecting the semiconductor devices within the circuit from overload.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description