MR1FT50L0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors, such as the MR1FT50L0, are electronic components used in electronic devices. The MR1FT50L0 is a type of through hole resistor. It is a low-impedance resistor that consists of two flanged terminals. The terminals are integrated into a ceramic tube which contains a ceramic material, such as pressed powder, on which a metal layer has been applied.

The purpose of the MR1FT50L0 is to create a specific electrical resistance in an electronic circuit or device. This resistance is used to reduce the current or voltage in a circuit, or to protect components from over-current or over-voltage. The resistor can also help reduce electromagnetic interference from other components or circuits in the device.

In order to select a suitable resistor for a particular application, it is important to consider the physical characteristics and specifications of the resistor. The physical characteristics of the MR1FT50L0 include its size, shape, and material. The resistor is made in a cylinder shape, with the flanged terminals at either end. It is usually made from ceramic and metal, with the metal layer applied to the ceramic.

The specifications of the MR1FT50L0 include its rated power, maximum current, and resistance range. Additionally, the resistor should have a minimum operating temperature and a maximum temperature rating. The rated power of the MR1FT50L0 is typically 50 mW, with a maximum current of 200 mA and a resistance range of 20Ω to 1000Ω.

The MR1FT50L0 is most commonly used in power supplies, audio amplifiers, radio and television sets, and LCD panels. Due to its low-impedance, the resistor can be used in circuits that require a high level of precision. The resistor is also suitable for high-frequency applications such as switched-mode power supplies, as well as for voltage, current, and temperature measurement devices.

The working principle of the MR1FT50L0 is based on the concept of Ohm’s Law. Ohm’s Law states that the current in an electrical circuit is proportional to the voltage applied. The voltage applied across a resistor is equal to the product of the current through the resistor and the resistance of the resistor. The resistance of the resistor has a direct impact on the current that flows through the resistor.

The MR1FT50L0 is a very versatile resistor and can be used in a wide range of applications. It is important to select a resistor based on its physical characteristics and specifications in order to ensure that it is suitable for the intended application.

The specific data is subject to PDF, and the above content is for reference