MRB24B-BC

Actuator Type:	Knob
Operating Force:	4.079gfm
Panel Cutout Dimensions:	Circular - 6.35mm Dia
Depth Behind Panel:	11.00mm
Features:	Sealed - Fully
Termination Style:	PC Pin
Mounting Type:	Panel Mount, Through Hole
Contact Finish:	Gold
Contact Material:	Beryllium Copper
Angle of Throw:	45°
Actuator Length:	14.30mm
Series:	MRB
Voltage Rating - DC:	28V
Voltage Rating - AC:	28V
Current Rating:	0.4VA (AC/DC)
Contact Timing:	Non-Shorting (BBM)
Circuit per Deck:	DP3T
Number of Poles per Deck:	2
Number of Decks:	1
Index Stops:	Fixed
Number of Positions:	3
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rotary Switches

Rotary switches are devices used to turn power or signals on and off in a variety of electronic devices. The MRB24B-BC is one such rotary switch. This device is often used to control devices that require multiple stages of control.The MRB24B-BC is a two-pole, four-position rotary switch best suited for low voltage, low current applications. It has an electrical rating of 0.3A at 12VDC and an insulation resistance of 10MΩ minimum. It has an operating life of up to 20,000 cycles and a dielectric strength of 1,500V RMS. It is made from high-grade plastic and has a height of 2.5 inches (6.35 cm) and a width of 1.5 inches (3.81 cm).The MRB24B-BC is an ideal choice for applications such as controlling audio or video equipment, or when multiple on/off combinations are required. It also works well for controlling lights, fans, alarms, and other devices. It can also be used for touch plates on security control panels and other safety applications.The MRB24B-BC has four basic positions. These are labeled "Off," "1," "2," and "Both." When the switch is in the "Off" position, power is disconnected from the load. When the switch is in the "1" position, current is sent to the first load only. When the switch is in the "2" position, current is sent to the second load only. Finally, when the switch is in the "Both" position, both loads receive current.The MRB24B-BC works by using two sets of contacts. One set of contacts, the primary contacts, are connected to the power source. The other set of contacts, the secondary contacts, are connected to the load. When the switch is turned, the contacts move together, making and breaking the circuit between the primary and secondary contacts. This, in turn, allows or stops current flowing to the load.In summary, the MRB24B-BC is a two-pole, four-position rotary switch perfect for low voltage and low current applications, such as audio or video equipment, lighting, fans, alarms, and other devices. With its long operating life and dielectric strength, the MRB24B-BC is sure to perform for many years to come.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description