MRS16000C8208FCT00

Series:	MRS16
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	8.2 Ohms
Tolerance:	±1%
Power (Watts):	0.4W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	--
Size / Dimension:	0.063" Dia x 0.142" L (1.60mm x 3.60mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistors

A resistor is a two-terminal electrical component that resists an electrical current. Resistors come in a variety of shapes and sizes, and are used in almost every electrical circuit imaginable. Through hole resistors are typically mounted on circuit boards or chassis. This type of resistor is made up of two conductive layers of material, usually metal or wire, attached to a nonconductive substrate.

MRS16000C8208FCT00

The MRS16000C8208FCT00 is a through hole resistor that can handle high power. It is a surface mount resistor, meaning that it is designed to be soldered onto a circuit board or other substrate. The resistor is composed of a semiconductor material that is sandwiched between two layers of metal electrodes, creating a resistor with a wide range of resistances. The resistor is designed to dissipate heat quickly and has a power rating of up to 16 watts. It also has a wide temperature range of -55°C to +155°C and a tight tolerance of ±0.1 ohm.

Application Field

The MRS16000C8208FCT00 through hole resistor is often used in high power applications such as motor control and power supplies. It is also used in filter circuits and audio-visual applications. The resistor’s wide temperature and tolerance range make it suitable for a variety of applications and conditions. Additionally, its surface mount design makes it ideal for tight-packed electronics, enabling efficient use of space. The MRS16000C8208FCT00 is also relatively inexpensive, making it a cost-effective solution for many applications.

Working Principle

The MRS16000C8208FCT00 works on the principle of Ohm’s law, which states that the current through a conductor between two points is directly proportional to the voltage across the two points. The MRS16000C8208FCT00 is composed of two metal electrodes, one of which is attached to a base material and the other is attached to a resistor material. When an electric current is applied to the two electrodes, the resistor material in the middle causes the current to be restricted, producing a voltage drop across the resistor. This voltage drop is proportional to the resistance of the resistor material.

Conclusion

The MRS16000C8208FCT00 through hole resistor is an effective and cost-efficient solution for many applications that require high power. Its surface mount design ensures that it can be used in tight-packed electronics, while its wide temperature range and tight tolerance make it suitable for all kinds of environments and conditions. It operates on the principle of Ohm’s law, and can dissipate up to 16 watts of power.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description