MRS25000C1211FC100

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are a common type of device that is used in a variety of electronic applications. The type of resistor can be used to limit current, provide protection against short circuits, and to provide a reference voltage to circuits. The MRS25000C1211FC100 is an example of a through hole resistor.

The MRS25000C1211FC100 is an SMT (Surface Mount Technology) resistor. It has small amounts of film resistors used in some applications, and consists of two or more terminals with metal resistive films on one or both surfaces of a substrate. The resistor is very small with dimensions as small as 0.2mm x 0.1mm, and consists of many material layers including a substrate layer, a bottom electrode layer, a resistive material layer, and a top electrode layer which is then coated with a protective coating.

The MRS25000C1211FC100 application field is broad. This type of resistor can be used for controlling and measuring current in circuits, as well as providing surge protection. It can also be used for creating low level signals for data conversion, providing voltage regulation and providing reference voltage to circuits. Additionally, this device can be used for various high frequency applications such as communications systems and RF amplifiers as it has very good stability and high accuracy.

The working principle of the MRS25000C1211FC100 is both simple and effective. The metal films on both surfaces of the resistor act as a barrier for the current flow, thus limiting the current flow to the desired level. The two terminal pads are connected to the circuit allowing the current to enter and exit the resistor. The resistance value is determined by the thickness and type of the resistive material used. The current is applied through the two terminal pads, and when this current passes through the resistor, a voltage is developed. This voltage is proportional to the current flowing through the resistor and is inversely proportional to the resistance value.

In conclusion, the MRS25000C1211FC100 is a through-hole resistor made using SMT (Surface Mount Technology) where two or more terminals are attached to conductive films. Its application field is broad and can be used for current limiting, data conversion, surge protection, voltage regulation, and more. Its working principle is simple but effective, since it uses the metal films to form the barrier for current flow which in turn limits it, and then a voltage develops as the current passes through the resistor.

The specific data is subject to PDF, and the above content is for reference