MS110E3/TR12

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MS110E3/TR12 Application Field and Working Principle

MS110E3/TR12 is a member of the diode-rectifier family of devices. It is a bridge-type full-wave rectifier that serves a wide range of applications in both industrial and consumer electronic products. The MS110E3/TR12 powered by a single phase alternating current (AC) voltage source is capable of delivering up to 1 Amp output current with a peak inverse voltage (PIV) of 3V.

What Is a Diode Rectifier

A diode-rectifier is an electronic component that can convert alternating current (AC) voltage into a direct current (DC) voltage. It consists of two or more diodes connected in such a way that current can only flow in one direction.

Types of Diode-Rectifiers

There are two types of rectifiers used in electronics: single and bridge rectifiers. A single rectifier consists of one diode connected in series with a load. It allows current to pass in one direction only, meaning that it only rectifies half of an AC waveform, meaning it does not conduct on the negative half-cycle. A bridge rectifier is made up of four diodes connected in a bridge circuit. This allows the current to be rectified on both the positive and negative half-cycles, meaning it can deliver higher currents at a lower cost than a single rectifier.

MS110E3/TR12 Features

The MS110E3/TR12 is a bridge-type rectifier equipped with a high-performance, low-temperature coefficient of leakage current, allowing it to deliver up to 1AMP output current with a peak inverse voltage of 3V. This device is also resistant to both temperature and vibration over a wide range, making it ideal for applications in harsh environments. In addition, its high reverse recovery time allows fast signal response and improved system efficiency, resulting in fewer parts being required overall.

Applications of MS110E3/TR12

The MS110E3/TR12 is often used in consumer and industrial power electronics applications, such as in AC-DC power supplies, electronic motor controls, and solar energy systems. It can also be used in automotive applications, such as in car audio systems and LED lighting control circuits. The combination of its cost-effectiveness and high-performance features make it a reliable choice for many applications.

Working Principle of MS110E3/TR12

The working principle of the MS110E3/TR12 is based on the use of four diodes arranged in a bridge circuit. The bridge rectifier has the ability to convert AC voltage into a DC voltage. As AC voltage is applied to the diode bridge, diodes D1 and D4 allow current to flow in the direction of and D2 and D3 do not. The current then flows from D1 to D2 or from D3 to D4, depending on the direction of the AC voltage. This results in a DC voltage waveform at the output.

Conclusion

The MS110E3/TR12 is a bridge-type rectifier that is capable of delivering up to 1 Amp output current with a peak inverse voltage (PIV) of 3V. Its high-performance features, cost-effectiveness, and wide range of applications make it a highly reliable choice for many applications in industrial and consumer electronic products.

The specific data is subject to PDF, and the above content is for reference