MS27467T13F8SA-LC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MS27467T13F8SA-LC is a type of connector commonly used in avionics and military electronics, such as radios and radar antennas. It is designed to be vibration-resistant, high-temperature tolerant and immune to humidity and other environmental degradation. It is an epoxy-based connector, which means it is difficult to remove or replace after it has been installed on a circuit board. The letters in its name stand for an array of features that make it unique.

The first part of the name is the “MS”, which stands for military-specification. This means it is designed to be used in military electronic applications where extra rigorous quality standards are applied. The numbers following the “MS” indicate the dimensions of the connector, including the outside diameter, the pin diameter, and the thread type. The letter “T” indicates the type of material used in the construction of the connector.

The next part of the name is the “13F8SA”, which indicates the number of pins in the connector, the size of the pins, and the type of insulation behind them. The “13F” stands for “13-pin Flat”, meaning there are 13 pins in a flat configuration. The “8SA” stands for “8-way Socket Assembly”, meaning 8 of the pins are in the form of a socket assembly. The remaining 5 pins are standard type.

The last part, the “LC”, stands for Low Current. This refers to the current rating of the connector. It is typically rated for up to 2.5A, which is much lower than the 20A rating found on some other connectors.

The MS27467T13F8SA-LC is most commonly used as a power connection in avionics applications, where its vibration resistance and low-current rating make it the perfect choice. It is also used as a connector in many military radios and radar systems, where its rugged construction and high temperature tolerance make it ideal for the application. It is also often used in automotive applications, where its low-current rating and vibration resistance make it preferable to standard connectors.

In terms of construction, the MS27467T13F8SA-LC is made up of two parts. The first part is the shell, which is usually made of an aluminum alloy or stainless steel. This is the outer part of the connector, and its main purpose is to provide a durable and weatherproof housing. The second part is the pins, which are typically made of brass or copper. These pins are designed to give the connector its electrical connection.

In terms of installation, the MS27467T13F8SA-LC is typically soldered onto a circuit board. Unlike other connectors, this connector is difficult to remove and replace due to its epoxy-based construction. This means that once it is installed, it is likely to stay installed. The connector must also be sealed to provide a waterproof seal.

In terms of working principle, the MS27467T13F8SA-LC works by providing an electrical connection between two points on a circuit board. The pins insert into sockets on the board, and when a voltage is applied, an electrical connection is made. Depending on the type of application, the voltage applied can range from millivolts to several hundred volts.

In summary, the MS27467T13F8SA-LC is a rugged and durable connector designed for use in avionics and military electronics applications. It is composed of two parts, a shell and pins, and is typically soldered onto a circuit board. It is designed to be resistant to vibration and high temperatures, and is ideal for applications where a waterproof connection is required.

The specific data is subject to PDF, and the above content is for reference