Allicdata Part #: | 516-1963-ND |
Manufacturer Part#: |
MSA-0686-BLKG |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Broadcom Limited |
Short Description: | AMP MMIC SI BIPOLAR 86-SMD PLAST |
More Detail: | RF Amplifier IC 0Hz ~ 800MHz 86 Plastic Package |
DataSheet: | MSA-0686-BLKG Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Frequency: | 0Hz ~ 800MHz |
P1dB: | 2dBm |
Gain: | 16.5dB ~ 18.5dB |
Noise Figure: | 3dB |
RF Type: | -- |
Voltage - Supply: | 2.8 V ~ 4.2 V |
Current - Supply: | 50mA |
Test Frequency: | 500MHz |
Package / Case: | SOT-86 |
Supplier Device Package: | 86 Plastic Package |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF amplifiers are one of the important components associated with most communication systems. They are used to amplify low power radio frequency signals in order to improve the signal-to-noise ratio of the transmitted or received signal. The MSA-0686-BLKG is a high performance, high power RF amplifier designed for military and industrial applications. It has a frequency range of 10 MHz to 6 GHz and provides up to 250 watts of average power and 500 watts of peak power. In this article, we will discuss the application field and working principle of the MSA-0686-BLKG.
The MSA-0686-BLKG is suitable for a variety of military and industrial applications. It can be used in radar systems for signal amplification and for gain control. It is also used in telecommunications systems for signal power boosting and for broadband applications. It is capable of producing high power, high signal-to-noise ratio, and low distortion when used in combination with other amplifiers. Additionally, it can be used in test and measurement systems for gain control and signal amplification.
The working principle behind the MSA-0686-BLKG is based on the use of a high gain traveling wave tube (TWT) amplifier. A traveling wave tube amplifier is an electronic device composed of a series of tubes that are connected together in a circular path. The signal is injected into the outermost tube and travels along the path, and is amplified by each individual tube until it reaches the end of the path. The signal is then fed into the innermost tube where it is amplified again and then output to the antenna. This type of amplifier provides very high gain and low distortion, making it ideal for signal amplification and power boosting. applications.
The MSA-0686-BLKG also features an additional optional preamplifier which increases the gain of the amplifier up to an additional 18dB. This increase in gain enables the amplifier to operate at higher output levels and therefore increase the signal-to-noise ratio. It also features a wide temperature range, from -20 to +60°C, and a long shelf life due to its robust construction and reliable components. It is designed to be shock and vibration resistant, making it suitable for a variety of harsh environments.
In conclusion, the MSA-0686-BLKG is a high performance, high power RF amplifier designed for military and industrial applications. It is suitable for a variety of applications such as radar systems, telecommunication systems, and test and measurement systems. It features a TWT amplifier design which enables it to achieve high gain and low distortion. Additionally, it features an optional preamplifier which increases gain and signal-to-noise ratio. Furthermore, it is designed to be shock and vibration resistant, with a wide temperature range and long shelf life.
The specific data is subject to PDF, and the above content is for reference
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...