Allicdata Part #: | MSA-0770-ND |
Manufacturer Part#: |
MSA-0770 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Broadcom Limited |
Short Description: | AMP MMIC SI BIPOLAR 70-MIL PKG |
More Detail: | RF Amplifier IC ISM 0Hz ~ 2.5GHz 70 mil Package |
DataSheet: | MSA-0770 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Frequency: | 0Hz ~ 2.5GHz |
P1dB: | 5.5dBm |
Gain: | 12.5dB ~ 14.5dB |
Noise Figure: | 4.5dB |
RF Type: | ISM |
Voltage - Supply: | 3.6 V ~ 4.4 V |
Current - Supply: | 15mA ~ 40mA |
Test Frequency: | 1GHz |
Package / Case: | 4-SMD (70 mil) |
Supplier Device Package: | 70 mil Package |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Amplifiers
MSA-0770 is a 50W Radio Frequency (RF) amplifier made by Motorola Solutions. It is designed for use in a wide variety of RF applications such as mobile phones, commercial and industrial radio and radar systems, and satellite communications. MSA-0770 amplifiers provide wide bandwidth and linear amplification capabilities.
The MSA-0770 amplifier is rated to produce a maximum of 50W output and at a frequency range of 2400-2500MHz. The amplifier has a typical gain of 13dB and an IP3 of -34dBm. The amplifier can be operated in either a Linear or Pulse mode. It is designed for Military and Aerospace applications, with an operating temperature range of -40 to +85 degrees Celsius.
The MSA-0770 RF amplifier is designed to produce linear amplification by using an input voltage to control the amount of current going into the output transistor. To achieve this, the amplifier uses a combination of a voltage regulator and a frequency doubler. The voltage regulator is used to regulate the input voltage to the amplifier, while the frequency doubler is used to double the frequency of the input signal, thus decreasing the linearity of the output signal. This linearity allows the amplifier to produce a high quality output signal with a low distortion to noise ratio.
The MSA-0770 RF amplifier also has a number of protection features designed to protect the amplifier from overload and overvoltage conditions. These protection features are designed to ensure that the amplifier is not damaged due to excessive voltages or currents. The amplifier also includes temperature protection to prevent the amplifier from overheating due to excessive power levels.
The MSA-0770 is a reliable, high-performance amplifier suitable for a variety of RF applications. It is designed to provide high linearity and wide bandwidth with a high level of protection from over-voltage and over-current conditions. The amplifier can be used in a variety of applications, from commercial and industrial radio and radar systems, to mobile phones and satellite communications.
The specific data is subject to PDF, and the above content is for reference
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...