Allicdata Part #: | MSA-0986-TR1G-ND |
Manufacturer Part#: |
MSA-0986-TR1G |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Broadcom Limited |
Short Description: | AMP MMIC SI BIPOLAR 86-SMD PLAST |
More Detail: | RF Amplifier IC ISM 100MHz ~ 5.5GHz 86 Plastic Pac... |
DataSheet: | MSA-0986-TR1G Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Frequency: | 100MHz ~ 5.5GHz |
P1dB: | 10.5dBm |
Gain: | 6dB ~ 7.2dB |
Noise Figure: | 6.2dB |
RF Type: | ISM |
Voltage - Supply: | 6.2 V ~ 9.4 V |
Current - Supply: | 25mA ~ 45mA |
Test Frequency: | 2GHz |
Package / Case: | SOT-86 |
Supplier Device Package: | 86 Plastic Package |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
In radio-frequency (RF) engineering, an RF Amplifier is a device used to amplify electromagnetic signals. The MSA-0986-TR1G is one example of such a device. Specifically, it is a microwave amplifier module designed for applications in the L- and S-band of the RF spectrum.
At the heart of the MSA-0986-TR1G is a gallium arsenide high electron mobility transistor (GaAs HEMT) field effect transistor (FET). This type of transistor is capable of providing extremely high gain with minimal distortion compared to other components, making it ideal for RF amplifier applications. The MSA-0986-TR1G also features a wideband noise figure and excellent return loss characteristics, allowing it to perform its amplification duties with very little noise.
The MSA-0986-TR1G RF Amplifier is well-suited for broadband applications, such as repeater stations and multi-channel systems. It can also be used in operation on high-power cellular systems, or in point-to-point/multipoint communications applications. The amplifier also has good linearity, offering good performance in both analog and digital signal amplification applications.
With regard to the working principle, the MSA-0986-TR1G RF Amplifier is designed to operate in an "active" mode. This means that the amplifier will actively seek out incoming power waves and amplify them. This is done by taking energy from the power supply and then recombining it with the signal to be amplified. As the signal is propagated through the amplifier, its power level is increased. The result is that the output signal will have a much higher power level than the input signal.
In order to achieve the best possible gain levels, the MSA-0986-TR1G is designed with a number of different stages. These include a pre-amplifier stage, a driver stage, a power amplifier stage, and an output stage. Each of these stages has different characteristics and benefits that determine the overall gain levels of the amplifier. For example, the pre-amplifier stage boosts the input signal, while the power amplifier stage boosts the output signal. The output stage then adds the amplified signals together to produce the final power levels.
In order to ensure that the gain levels remain consistent, the MSA-0986-TR1G features some additional circuitry. This includes a gain control circuit, which is used to adjust the gain levels of the amplifier. This circuit is set up so that the gain levels are not excessively low, even when the input and output signals are at different frequencies. Additionally, the gain control circuit allows the gain levels to be adjusted according to the requirements of the application.
The MSA-0986-TR1G RF Amplifier is an extremely versatile device, offering excellent performance in a wide range of applications. As such, it is an excellent choice for engineers looking for an effective, reliable, and powerful amplifier. With its impressive gain levels and excellent noise figure, the MSA-0986-TR1G is sure to deliver superior performance in a wide variety of RF applications.
The specific data is subject to PDF, and the above content is for reference
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...