Allicdata Part #: | 516-1968-ND |
Manufacturer Part#: |
MSA-1105-STRG |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Broadcom Limited |
Short Description: | AMP MMIC SI BIPOLAR 05-SMD PLAST |
More Detail: | RF Amplifier IC 50MHz ~ 1.3GHz 05 Plastic Package |
DataSheet: | MSA-1105-STRG Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Frequency: | 50MHz ~ 1.3GHz |
P1dB: | 17.5dBm |
Gain: | 10dB ~ 12dB |
Noise Figure: | 3.6dB |
RF Type: | -- |
Voltage - Supply: | 4.4 V ~ 6.6 V |
Current - Supply: | 80mA |
Test Frequency: | 500MHz |
Package / Case: | 4-SMD (05 Plastic) |
Supplier Device Package: | 05 Plastic Package |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The MSA-1105-STRG is a device belonging to the family of RF amplifiers. It is designed to provide a convenient low cost solution for broadband amplifiers in the 2.2-2.5GHz range. This device operates with a low current power supply, making it suitable for applications where additional amplification is required. This device is often used in applications such as CATV, wireless communication and Wi-Fi.
The MSA-1105-STRG is a semiconductor-based amplifier that uses an integrated circuit design. This device is often used in applications that require higher amplification than what is typically attainable with low cost RF amplifiers. The device consists of a two stage amplifier consisting of an input amplifier and a gain adjustable amplifier. The input amplifier has a quarter wave line transformer that converts signals from the RF source to the terminal of the amplifier. The gain is adjustable by means of a booster resistor or capacitor. The gain of the amplifier is adjustable from 0dB to +20dB.
The MSA-1105-STRG has a maximum output power of +20dBm and can achieve a gain of 25dB. The device can be powered by either a +15V or +24V power supply. The device has a typical noise figure of 1.2dB across the entire frequency range. The device has a high output power and a low input power handling capability. The device operates from a balanced output circuit which is ideal for use in CATV and wireless communication networks. The device is also well suited for applications that require a large frequency range such as Wi-Fi and satellite communications.
The MSA-1105-STRG is also suitable for both short and long range applications. The device is capable of providing more than 2dB of gain at 1/2 meter distance. The device has a low noise figure and a relatively high gain to reduce unwanted interference. The device has excellent operating temperature stability and can operate over a wide temperature range. The device has a high power handling capability and is able to handle high power levels without degrading performance.
The MSA-1105-STRG is an excellent choice for applications such as CATV, wireless communication networks, and Wi-Fi. This device provides low cost and high performance in an easy to use package. This device is well suited for a wide range of applications and can provide significant savings in both money and time. The device is also suitable for applications where additional amplification is required, such as in broadcasting and satellite communications. The device provides an excellent value for its price.
The specific data is subject to PDF, and the above content is for reference
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...