MSA-1105-TR1G RF/IF and RFID |
|
Allicdata Part #: | 516-1593-2-ND |
Manufacturer Part#: |
MSA-1105-TR1G |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Broadcom Limited |
Short Description: | IC AMP MMIC BIPOLAR 80MA 05-SMD |
More Detail: | RF Amplifier IC ISM, PCS, WLL, 802.16/WiMax 50MHz ... |
DataSheet: | MSA-1105-TR1G Datasheet/PDF |
Quantity: | 1000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Frequency: | 50MHz ~ 1.3GHz |
P1dB: | 17.5dBm |
Gain: | 10dB ~ 12dB |
Noise Figure: | 3.6dB |
RF Type: | ISM, PCS, WLL, 802.16/WiMax |
Voltage - Supply: | 4.4 V ~ 6.6 V |
Current - Supply: | 80mA |
Test Frequency: | 500MHz |
Package / Case: | 4-SMD (05 Plastic) |
Supplier Device Package: | 05 Plastic Package |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
MSA-1105-TR1G is an amplifier that has a wide variety of applications and a relatively simple working principle. It is classified as an RF Amplifiers, and is often employed in areas where a higher amount of precision and control is required such as feedback control, base or mobile station transceivers, broadcast, medical instrumentation and many others.
The main purpose of the MSA-1105-TR1G is to provide a high level of amplification for signals in the RF domain. It is usually used to amplify complex signals to reduce noise and distorted signals generated by other electronics in the system. The amplifier is typically used to increase the signal to noise ratio while maintaining a low overall gain thereby obtaining the desired output.
The working principle behind the MSA-1105-TR1G is based on the combination of two RF devices, namely the traversing cathode tube and the resonant circuit. The transceivers amplify the signals with the resonant circuit and the cathode tube works to focus the signal energy into a narrow band of frequencies. As a result, the signal output can be very accurately tailored to suit the required application.
The MSA-1105-TR1G can be used in a variety of applications and is often deployed in wireless communication systems. It can be used as an amplifier in base or mobile station transceivers. It is also commonly employed in feed-forward and feedback control systems, which are used in many high-precision applications. Furthermore, the amplifier can be used in broadcast transmitters, medical instrumentation, and a wide range of other applications.
In addition, the MSA-1105-TR1G can be used as an amplifier in a wide range of other applications such as television receivers, receivers for broadband communications, and other industrial/commercial applications. The amplifier is suitable for use in any environment and can provide reliable performance with minimal distortion. It can be used with both analog and digital signals, allowing it to be used with a wide range of systems.
The MSA-1105-TR1G is an amplifier that is suitable for use in a variety of applications and a wide range of environments. It is used to amplify signals in the RF domain. It is based on the combination of a cathode tube and a resonant circuit. The amplifier can be used for applications such as base and mobile transceivers, feedback and feed-forward control systems, and broadcast transmitters. It can also be used for a variety of other applications such as television receivers and receivers for broadband communications. The MSA-1105-TR1G is an amplifier that is suitable for use in any environment and can provide reliable performance with minimal distortion.
The specific data is subject to PDF, and the above content is for reference
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...