MSP10C01330RGEJ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays, is a functional unit described by the IEEE Std1886.1 standard, which defines electrical characteristics such as response times, common-mode voltages, and power dissipation. The MSP10C01330RGEJ is an example of a resistor network that meets the requirements of this standard. This article will discuss the application field and working principle of the MSP10C01330RGEJ.

The MSP10C01330RGEJ was designed for use in a wide range of applications. It is a 5-pin resistor network that can be used as a voltage divider and current limiter. The array features very low resistance values of just 0.25Ω in each pin. The network is also capable of handling up to 110VDC and has an operating temperature range of -55°C to 105°C.

The MSP10C01330RGEJ is composed of four resistors connected in series to form a voltage divider. Each resistor is connected between two of the pins of the network. The 4 resistors form a voltage divider with resistances of 330Ω, 1.5Ω, 0.9Ω, and 0.25Ω, respectively. This arrangement makes it possible to accurately divide a DC voltage applied across the two end pins, so that any given point in the network can be used to measure a certain fraction of the voltage applied.

In addition to being used as a voltage divider, the MSP10C01330RGEJ can also be used as a current limiter. When a current is applied to the resistor network, the voltage across each resistor will rise until it reaches its limit. This voltage buildup is used to control the current in the circuit. When the voltage across a resistor exceeds its rated value, the current automatically reduces to a safe level. This current regulation makes the MSP10C01330RGEJ ideal for applications that require a safe and reliable current path.

When used as a current limiter, the MSP10C01330RGEJ can be connected in parallel with the load. This will result in the current being spread over the four resistors, which helps to reduce the voltage drop across the load. Additionally, the presence of the resistor network prevents the voltage from exceeding its rated value.

The MSP10C01330RGEJ is a versatile tool that can be used in a variety of applications. It is highly accurate and can be used to control the current in a circuit, as well as to divide a voltage. Its wide operating temperature range and low internal resistance make it an ideal choice for many types of projects.

The specific data is subject to PDF, and the above content is for reference