MT130CB16T2-BP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MT130CB16T2-BP is a silicon-controlled phase angle regulator module. The module itself consists of a thyristor, an SCR and a diode, each of which is mounted in a heat-sinkable housing and connected in a series configuration as a semiconductor switch. The thyristor is used to initiate the firing of the SCR, and the diode provides protection from high-voltage transients. The module is a two-terminal device, with the two terminals used for pulse signal input and control signal input, respectively.

Application field of MT130CB16T2-BP:

The MT130CB16T2-BP module is primarily used in the power controlling applications, such as DC motor speed control and light dimming. This module is suitable for applications where precise control of an AC load is required, such as in industrial machines, process control instruments and automotive applications. In addition, the module can also be used in AC power regulators to optimize AC frequency and power (for example, three-phase AC induction motors).

Working Principle of MT130CB16T2-BP:

The MT130CB16T2-BP module works using the principle of phase angle control. The module converts the input signal of a pulse signal or a control signal into a DC voltage or a pulsed current at the output. The module can be adjusted to provide a required output voltage or current, depending on the size of the input signal. The duration of the output signal can be set by adjusting the level of its triggering voltage. This level can be controlled with a potentiometer or a programmable voltage source.

When the MT130CB16T2-BP module is connected to an AC power source and an AC load, the power to the load is adjusted by controlling the conduction angle of the thyristor. The thyristor will remain in the OFF state, unless the firing voltage exceeds the value of the control signal. When this occurs, the thyristor is turned on, causing the current to flow in the thyristor and the AC power to the load. The current in the SCR will continue to flow until the firing voltage falls below the control signal threshold, at which point the SCR is turned off and the exitation current stops flowing.

In addition to controlling the phase angle of AC power, the MT130CB16T2-BP module can also be used to control the on-off state of the AC power supply. This can be done by adjusting the duration for which the thyristor and the SCR are in the conducting state, thus controlling the amount of AC power delivered to the load. This method of control is commonly used in lamp dimming or motor speed control applications.

The MT130CB16T2-BP module is thus a reliable and efficient control module for controlling the phase angle and on-off state of AC power in applications such as motor speed control, light dimming, and AC power regulators. The module is simple to install and use, and offers precise control of the AC load, while also providing protection from high voltage transients.

The specific data is subject to PDF, and the above content is for reference