MT2B-0R005F1

Series:	MT
Packaging:	Bulk
Part Status:	Active
Resistance:	5 mOhms
Tolerance:	±1%
Power (Watts):	3W
Composition:	Thick Film
Features:	Current Sense, Moisture Resistant
Temperature Coefficient:	--
Operating Temperature:	--
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.200" Dia x 0.580" L (5.08mm x 14.73mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Through Hole Resistors are one of the most fundamental of electronic components. As the name implies, these are resistors which are mounted on a printed circuit board (PCB) utilizing hole-through mounting technology. MT2B-0R005F1 is one such through-hole resistor which is widely used. In this article, we will discuss MT2B-0R005F1\'s application field and its working principle.

MT2B-0R005F1 overview

The MT2B-0R005F1 through-hole resistor is a small-sized resistor which is commonly used in applications requiring high performance and reliability. It has a 0.5Ω resistance value which makes it suitable for use in applications such as switching mode power supplies, output stages, and certain control circuits. The MT2B-0R005F1 has a relatively low power rating of 1/4W which makes it suitable for use in conditions requiring limited power dissipation. This resistor features a through-hole design which enables it to be mounted on a PCB without any problems.

MT2B-0R005F1 Application Fields

The primary application field for MT2B-0R005F1 through-hole resistors is in the control circuits for switching mode power supplies. This type of circuit typically requires a low resistance value, since it is used to regulate the flow of current from the power source to the load. By taking advantage of the 0.5Ω resistance value of the MT2B-0R005F1, these circuits can be effectively controlled. In addition to its use in switching mode power supplies, the MT2B-0R005F1 can also be employed in a wide range of other applications. It can be used as a voltage divider in audio equipment, as a current regulator in motion control systems, and as a buffer in LED lighting systems. The low power rating of the MT2B-0R005 F1 also makes it suitable for use in situations where power dissipation needs to be minimized, such as low-power sensor systems.

MT2B-0R005F1 Working Principle

The MT2B-0R005F1 works on the same principle as all other resistors. It consists of two conducting plates sandwiched between two non-conductive layers. The plates are separated by a distance which determines the resistance value of the resistor. When a current is applied to the MT2B-0R005F1, it impedes the current flowing through it, thus reducing the voltage across its terminals. This is known as Ohm’s law.The resistance value of the MT2B-0R005F1 can be adjusted by changing the spacing between the plates. By increasing the spacing, the resistance increases, while decreasing the spacing decreases the resistance. This makes the MT2B-0R005F1 highly versatile since it can be adapted to suit the specific requirements of any given application.

Conclusion

The MT2B-0R005F1 is a small-sized through-hole resistor which is widely used in applications requiring high performance and reliability. Its 0.5Ω resistance value and 1/4W power rating make it suitable for use in conditions where both performance and power dissipation are important considerations. The MT2B-0R005F1 works on the same principle as all other resistors, wherein it impedes the flow of current and reduces the voltage across its terminals. This makes it highly versatile, since it can be customized to suit the specific requirements of any application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description