MTMM-103-06-L-S-200

Series:	*
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MTMM-103-06-L-S-200 is a 10.3mm, 3 row, 6 pin, long shaft, surface mount Rectangular Connector. These are especially well-suited for applications requiring a very low profile such as high frequency and data transmission.This type of connector shares some design attributes with its popular sister, the D-subminiature, however unlike the d-sub, they are not designed for high current applications. Instead, the MTMM-103-06-L-S-200 is known for its very low profile, high frequency transmission capability, and small footprint.The most common application of the MTMM-103-06-L-S-200 Rectangular Connector is high frequency applications such as the interconnect between GPS systems or mobile phones and antenna systems. The primary working principle of the connector is the use of mechanical contacts to make electrical connections. This is achieved by using a variety of contact or solder tail configurations as well as the support of medium-to-high frequency transmission capabilities. The connected pins must be properly configured to ensure a good connection.For example, when making a connection between two pins of the MTMM-103-06-L-S-200, the most common configuration is a straight 6 position row. This will align the pins so they match up appropriately. The pins of the connector and socket are stamped with numbers so that the correct connections can be identified when mating the connector each time.The MTMM-103-06-L-S-200 connector is also available in surface mount configuration. This makes it easier to mount the connector to a circuit board in tight spaces that may otherwise be too difficult to access. The surface mount configuration is designed to be quickly installed with minimal effort, and is commonly used in automotive, consumer electronics, and telecommunications applications. The connector is also designed to provide a reliable connection with low resistance making it suitable for high frequency applications. The contacts are designed to make a secure, gas-tight connection and reduce the chance of corrosion. The contacts are gold-plated for corrosion resistance and ensure low levels of contact resistance. Overall, the MTMM-103-06-L-S-200 is an ideal high-frequency connector choice for a variety of applications. The low profile design, high frequency transmission capabilities, and reliable contact ensure a reliable connection for years to come.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description