MTSMC-C2-N3-SP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Transceiver Modules are widely used in many industries today. The MTSMC-C2-N3-SP is a high-performance transceiver module that supports 3G/4G/LTE-Advanced mobile communication standards. It offers low power consumption and high signal-to-noise ratio. It is often used in applications such as consumer electronics, machine-to-machine communications, Internet of Things (IoT), and unmanned aerial vehicles.

The MTSMC-C2-N3-SP is made up of a transceiver and an antenna. The transceiver is a high performance integrated circuit. It is designed to provide a continuous transmission of digital information over a wide frequency range. The antenna is a specially designed printed circuit substrate antenna. It is designed to maximize the transmission of the signal and to minimize the attenuation of that signal. The antenna also provides the connection to the radio frequency transmissions from other wireless devices.

The MTSMC-C2-N3-SP is designed to be used in a wide range of application fields. It is ideal for use in wireless communication networks such as 802.11g/n/ac, LTE, and UMTS. It is also used in applications that require a wide range of data transmission services such as video streaming, peer-to-peer communications, and remote medical monitoring.

The MTSMC-C2-N3-SP is also designed for use in industrial and automotive applications. For these applications, the transceiver module supports the ability to communicate at distances of up to 40 metres. It is also capable of transmitting a maximum of 4,500 frames per second at a frequency of 2,400 MHz. This makes the module suitable for time-critical industrial applications such as radio-frequency identification (RFID), machine-to-machine communications, and vehicle diagnostics.

The working principle of the MTSMC-C2-N3-SP is based on the concept of frequency division multiplexing (FDM). The circuitry of the module is divided into multiple radio frequency (RF) receiver and transmitter channels. Each RF channel is then assigned to a unique set of frequencies that are used to carry data. This data is divided into two groups, the uplink frequency group and the downlink frequency group. The uplink frequency group transmits data from the device to the transceiver, while the downlink frequency group transmits data from the transceiver to the device.

When data is transmitted, the module filters the frequency of the data using a low-pass filter. This removes any unwanted frequencies, which helps to prevent interference between adjacent channels. The filtered data then passes through a multiplexer, which distributes the data to the correct RF channels. The data is then modulated using an amplitude shift keying (ASK) or frequency shift keying (FSK) modulation technique. Finally, the modulated data is transmitted over the air using an RF antenna.

The MTSMC-C2-N3-SP module is a highly capable RF transceiver module that supports a wide range of applications. Its working principle is based on the concept of FDM, which enables the module to manage multiple channels simultaneously. The module is also designed to be used in the wide range of application fields such as consumer electronics, machine-to-machine communications, Internet of Things (IoT), and unmanned aerial vehicles.

The specific data is subject to PDF, and the above content is for reference