MXLP4KE250A Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Diodes are commonly used for protecting a wide variety of sensitive electronic circuits. They are usually used to protect against voltage transients primarily caused by inductive loads, lightning strikes, or the switching of motors and generators. The MXLP4KE250A is a type of unidirectional TVS – Diode with a fast response time and a low capacitance, making it ideal for high frequency applications such as Gigabit Ethernet and USB.

Applications of MXLP4KE250A

The MXLP4KE250A is a voltage clamping device designed to protect voltage-sensitive components from transient over voltages which can cause catastrophic device failure. The device can be used to clamp high voltage transients before they reach the protected load, while low capacitance ensures that the device does not interfere with the signal quality at higher frequencies. The device has a wide range of applications, including:

• Protecting Gigabit Ethernet link segments
• Protecting signal lines for High-Speed Stereo FM Radio signals
• Surging the USB 3.1 interface from damage & protecting Motherboard ICs
• Protecting high bandwidth telecom and signal lines
• Telecom and networking surge protection applications

Working Principle of MXLP4KE250A

The principle of operation of the MXLP4KE250A is based on the two-terminal avalanche breakdown phenomenon of a diode structure. When the voltage across the terminals of the device exceeds the peak pulse power rating (Ppk), it enters the avalanche breakdown region and the current begins to flow, limiting the voltage across the device. The breakdown voltage is dependent on the way the diode is designed and is determined by the Ppk rating of the device. The MXLP4KE250A has a breakdown voltage of 250V and a maximum peak pulse power rating of 1KW.

Once enabled, the device provides superior transient voltage protection beyond its Ppk rating, while its low capacitance ensures that the signal quality is not affected at higher frequencies. Additionally, due to its fast response time, the device can absorb high amplitude transients quickly and efficiently without latching. By dissipating the transient voltage in the form of heat, the device helps to ensure that the protected load remains operational throughout the event.

Conclusion

The MXLP4KE250A is a unidirectional TVS - Diode with a wide range of applications. It has a fast response time and low capacitance, making it ideal for high frequency applications such as Gigabit Ethernet and USB. The device can clamp high voltage transients before they reach the protected load, while its low capacitance ensures that the signal quality is not affected at higher frequencies. The device is able to absorb high amplitude transients quickly and efficiently, providing superior transient voltage protection of up to 250V.

The specific data is subject to PDF, and the above content is for reference