MXLPLAD18KP18CA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MXLPLAD18KP18CA is a ESD Standoff devices known as a Transil voltage protection module. It is an integral part of the TVS - Diodes family of components, and it is most commonly used to protect sensitive integrated circuit (ICs) from the damages of electrostatic discharge (ESD) and over-voltage events. This part has a dual protection channel with a nominal stand-off voltage of 18V.

This part is ideal for protecting board-level electronic circuits that are usually connected to transceivers, ports, and connectors. It has a low capacitance between terminals, making it suitable for high-speed signal applications. The dual protection channel of this part can handle transient over-voltage events of up to 18kV.

The working principle of MXLPLAD18KP18CA is based on a combination of devices including transistors, diodes, capacitors, and resistors. In an ESD event, the device quickly responds to the transient and redirects it safely away from the sensitive circuit, reducing the peak energy of the event. This is due to the combination of components that allows for a low capacitance between pins, enabling the device to respond faster than alternative components.

In addition, this part is equipped with an ESD protection diode array, which serves as an additional layer of protection against over-voltage events. This array consists of two series-connected diodes, each with a voltage rating of 18V. These diodes allow for a lower clamping voltage, enabling the device to respond to transients faster while maintaining a low stand-off voltage.

The performance of this part is further enhanced by its over temperature protection (OTP) and electrostatic discharge (ESD) protection. The OTP feature prevents the device from over-heating in high temperature environments, while the ESD protection prevents the circuit board from being damaged by ESD-induced currents. The combination of features enables the device to be used in a wide range of applications, from medical equipment to computing and communication devices.

In conclusion, the MXLPLAD18KP18CA is a highly effective device for the TVS - Diodes family of components. It is equipped with a dual protection channel for high-speed signaling applications, and a low capacitance between terminals for fast transient response. The part also features an ESD protection diode array and an OTP feature for additional protection.

The specific data is subject to PDF, and the above content is for reference