MXLSMBG12CA/TR Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS or transient voltage suppressors are protection devices which are widely used in industries because of their ability to restrain electrical spikes that occur in high-power electrical systems. The MXLSMBG12CA/TR is one of the most common types of TVS diodes being used today. It offers excellent protection against reverse voltage surges, voltages beyond the safe operation limit of electronic components, and short-duration electrical over-voltages that could damage sensitive equipment.

The MXLSMBG12CA/TR combines a reverse standoff voltage of 12 Volts with an ultra-low clamping voltage of 20.1 Volts and a low leakage current of 20 microamps. It also comes with a low capacitance of 1 pf and a maximum non-repetitive peak pulse power dissipation of 330 watts. This combination of features makes the device suitable for use in a wide range of applications such as automotive electronics, LED lighting, and industrial, electronics, computer, and communications applications.

One of the primary applications of the MXLSMBG12CA/TR is the protection of high-speed, high-current circuits. When high-energy spikes are detected, the diode brings the voltage down to a safe level to prevent any damage to the circuit. This makes the device ideal for use in automotive electronics and other high-power systems where sudden increases of voltage can cause serious damage.

In addition, the MXLSMBG12CA/TR is widely used in the industrial and communication sectors. It is capable of limiting the voltage of a device to a safe operating level while at the same time providing a high current capacity which helps to reduce the switching time of the device. This means that the protective device is less likely to be triggered during a short circuit or overvoltage condition.

The working principle of the MXLSMBG12CA/TR is simple; when there is a sharp increase in the voltage, it reduces the voltage by clamping it to a safe level. The device does this by a built-in shield which is made up of two plates that act as a rectifier. The device will conduct current when the voltage is higher than the safe level and the current flows through the device to ground. This lowers the voltage and ensures the stability of the system.

In conclusion, the MXLSMBG12CA/TR is an excellent protection device that offers excellent protection against reverse voltage surges, voltages beyond the safe operating limits, and short-duration electrical over-voltages. It can be used in a wide range of applications such as automotive electronics, LED lighting, and industrial, electronics, computer, and communications applications. The device also has an ultra-low clamping voltage and a low leakage current which ensures the stability of the system. The working principle of the device is based on its built-in shield which serves to reduce the voltage by clamping it to a safe level when there is an increase in the voltage.

The specific data is subject to PDF, and the above content is for reference