MXLSMBJSAC5.0 Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppression) diodes are an important part of the deterring system used to protect electronic components from electrical surges present on power sources. These surges are caused by lightning strokes, electrostatic discharges (ESD) or other transient events and can damage the components irrecoverably.

The MXLSMBJSAC5.0 is a type of TVS diode specifically designed to protect smaller electronic parts. The MXLSMBJSAC5.0 is a unidirectional diode, meaning it will only allow current to pass through it in one direction, i.e. from anode to cathode. It is designed to break down and shunt current away from the component to ground when a certain threshold voltage is exceeded. This breakdown voltage, known as the "clamping voltage", is typically 5.5V for the MXLSMBJSAC5.0.

The MXLSMBJSAC5.0 has a built-in high-frequency roll-off circuit. This allows it to clamp the voltage within a certain frequency range known as the filter frequency. The frequency range is adjustable, allowing the user to tailor the device\'s protection characteristics to the application. When the filter frequency is set to a high frequency, it can provide a greater amount of filtering and protection against high-frequency transients.

The MXLSMBJSAC5.0 also has an integrated ESD protection circuit. This circuit is designed to protect the electronic components from damage due to electrostatic discharges caused by human contact. ESD protection is especially important for electronics that are handled frequently, such as portable devices.

The MXLSMBJSAC5.0 has a typical reverse stand-off voltage of 5V. This is the voltage at which the device will turn on, allowing current to pass. When the clamping voltage is reached, the current will be shunted away from the electronic component and into the ground, protecting it from the voltage surge.

In summary, the MXLSMBJSAC5.0 is a specialized transient voltage suppression (TVS) diode designed to protect small electronic components from voltage surges caused by lightning strikes, electrostatic discharges, or other transient events. The diode has a built-in high-frequency roll-off circuit, which allows it to filter out voltage spikes within a frequency range, and an integrated ESD (electrostatic discharge) protection circuit to protect the electronics from damage due to human contact. The reverse stand-off voltage of the device is 5V and the clamping voltage is 5.5V.

The specific data is subject to PDF, and the above content is for reference