MXO45-3C-4M9152

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	10µA
Height - Seated (Max):	0.201" (5.10mm)
Size / Dimension:	0.819" L x 0.520" W (20.80mm x 13.20mm)
Package / Case:	14-DIP, 4 Leads (Full Size, Metal Can)
Mounting Type:	Through Hole
Ratings:	--
Current - Supply (Max):	26mA
Operating Temperature:	-20°C ~ 70°C
Series:	MXO45
Voltage - Supply:	5V
Output:	HCMOS, TTL
Function:	--
Frequency:	4.9152MHz
Type:	XO (Standard)
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electronic circuits that generate a periodic alternating-current signal. Oscillators have a wide range of practical and theoretical applications, such as producing signals to transmit information, and generating clock signals used in microprocessors and other digital logic circuits.The MXO45-3C-4M9152 is a type of oscillator designed for low power and space-constrained applications, such as mobile phones and other handheld devices. It is specifically designed for oscillation frequency control. The oscillator has a frequency range of 10 kHz to 4.9 MHz, with an accuracy of ±0.5%. It is housed in a four-pin 2.5mm x 3mm surface-mount package.The working principle of the MXO45-3C-4M9152 is based on the negative resistance principle. This means that, as the current passing through the device is increased, the voltage across the device will decrease, resulting in an unstable operating point. This unstable behavior is then exploited to build an oscillator.At the heart of the oscillator is the oscillator core, which comprises the resistors, capacitors and an active device (in this case, a transistor), and the voltage feedback loop that is required to produce the oscillations.The oscillator works by creating a feedback circuit with the active device in the loop. The device is arranged so that either a voltage or current is fed back from the output to the input, thus completing the loop. The voltage or current then alternates between both the input and the output constantly, producing the oscillating signal.Another important component of the MXO45-3C-4M9152 is the external load resistor, which is used to tune the frequency of the oscillator. The resistor helps to adjust the Q-factor of the oscillator, which is the measure of the strength of the oscillatory signals produced. By increasing the value of the load resistor, the frequency of the oscillator can be tuned.The MXO45-3C-4M9152 is typically used in applications such as frequency synthesis, signal generation, pulse generation, clock circuits, and crystal oscillator circuits. It is ideal for situations where low power consumption and small size are of utmost importance. It can also serve as an ideal solution for applications where high stability and low cost are required. The MXO45-3C-4M9152 is also the recommended choice when accuracy and wide frequency range are important factors.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description