MXO45HS-2C-4M5000

Frequency Stability:	±100ppm
Current - Supply (Disable) (Max):	10µA
Height - Seated (Max):	0.217" (5.50mm)
Size / Dimension:	0.520" L x 0.520" W (13.20mm x 13.20mm)
Package / Case:	8-DIP, 4 Leads (Half Size, Metal Can)
Mounting Type:	Through Hole
Ratings:	--
Current - Supply (Max):	26mA
Operating Temperature:	-20°C ~ 70°C
Series:	MXO45HS
Voltage - Supply:	5V
Output:	HCMOS, TTL
Function:	Standby (Power Down)
Frequency:	4.5MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Oscillators

Oscillators are electrical components that produce a waveform output dependent on the time it takes to complete one cycle. In the electrical engineering domain, oscillators are used to generate radio frequencies and simulate signals so they can be analyzed. Depending on the application, the frequency of an oscillator can range from a few cycles per second (Hz) to millions of cycles per second (MHz).

MXO45HS-2C-4M5000 Oscillator

The MXO45HS-2C-4M5000 is a 2 channel Phase Locked Loop (PLL) Oscillator designed to produce clock signals over combined analog and digital frequencies. This particular oscillator was designed to provide frequency control of combined analog and digital signals to reduce power dissipation and conserve board space.

Application Field

The MXO45HS-2C-4M5000 is typically used in the application of synthesized radio transmitters, audio and video playback devices, and other communication systems that require reliable and accurate frequency control. This type of oscillator provides an efficient and low-noise solution compared to other oscillators.The MXO45HS-2C-4M5000 can also be used in testing and measurement equipment, automotive applications, and in audio and video devices.

Working Principle

The MXO45HS-2C-4M5000 is a Phase Locked Loop (PLL) Oscillator with a 2nd order Butterworth filter. It works by producing a sinusoidal output that is used to lock the output frequency to a reference frequency. This reference frequency comes from an external clock such as a quartz crystal oscillator. The output frequency can be adjusted within a certain range by changing the voltage applied to the control terminal and adjusting the associated tuning capacitors located inside the package. The oscillator has a high start-up frequency to easily settle at the target frequency. The MXO45HS-2C-4M5000 also has low jitter performance; this is very important for applications that require accurate timing and synchronization.

Conclusion

In conclusion, the MXO45HS-2C-4M5000 is an oscillator specifically designed for applications that require accurate frequency control. It finds wide use in synthesized radio transmitters, audio and video playback devices, communication systems, and other measuring and analytical equipment. This oscillator is also designed with low power consumption and minimal board space requirements in mind. The 2nd order Butterworth filter also gives the oscillator low jitter performance, making it ideal for precise timing and synchronization applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description