MXP4KE10CAE3 Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Diodes

Transient Voltage Suppression (TVS) diodes, also known as suppressors, are specialized diodes used to protect electronic equipment against voltage transients caused by lightning strikes or accidental connection of an inductive load to power supplies. The MXP4KE10CAE3 TVS diode is a bridge design that offers unidirectional or bidirectional protection and contains sacrificial elements that prevent damage to the protected device.

Application Field

The MXP4KE10CAE3 TVS diode is used for a wide variety of applications, including over-voltage protection, lightning protection, and transients protection. It is designed to operate in areas with up to 10kV transient surge voltage protection and features low breakdown voltage (3V typically). It can also be used in conjunction with a capacitive element to provide over-voltage protection for computer systems, telecom services, and DC-DC converters.

Working Principle

The working principle of the MXP4KE10CAE3 TVS diode is relatively simple. It is composed of two p–n junctions connected in reverse direction and has an additional Zener element. When the transient voltage is higher than the breakdown voltage, the TVS diode will conduct and act as a short circuit, protecting the device. The TVS diode can clamp and protect the system from excessive voltage by enabling the current to flow through its components (anode and cathode) instead of through the equipment.

The Zener element acts as a protective element and helps to maintain the maximum voltage at any time. The rate of voltage rise for this device can be 80V/ns and above and is considered to be very fast. When the voltage is above the breakdown voltage, the Zener element and the diode elements work together to maintain the system voltage and protect the components from damage.

These types of protection diodes are normally used in MCUs, FPGA, DSPs, and other sensitive electronic components. They help to protect the circuits and components from electrostatic transients and transient over-voltage conditions created by inductive or capacitive circuit elements.

MXP4KE10CAE3 is designed to handle a large amount of current due to its low forward voltage. It can provide up to 10A of current and has very good performance up to 10kV. Additionally, the diode\'s low dynamic impedance adds to the protection capabilities of the device.

The diode is highly reliable and easy to use, making it a popular choice among users. It can help manufacturers keep their equipment safe and operational by reducing the risk of component damage due to over-voltage or over-current conditions.

The specific data is subject to PDF, and the above content is for reference