MXPLAD30KP100CAE3

Voltage - Clamping (Max) @ Ipp:	162V
Supplier Device Package:	PLAD
Package / Case:	Nonstandard SMD
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 150°C (TJ)
Capacitance @ Frequency:	--
Applications:	General Purpose
Power Line Protection:	No
Power - Peak Pulse:	30000W (30kW)
Current - Peak Pulse (10/1000µs):	186A
Series:	Military, MIL-PRF-19500
Voltage - Breakdown (Min):	111V
Voltage - Reverse Standoff (Typ):	100V
Bidirectional Channels:	1
Type:	Zener
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The MXPLAD30KP100CAE3 is a diode device known as aTVS (Transient Voltage Suppressor) designed for use in applications that require protection from high levels of transient voltage. The device is fabricated from a thin film of polysilicon deposited on a ceramic substrate and typically has a peak stand–off voltage of 30kV. It is the rectangular leadless package version of the familiar rectifier diode commonly used in electronic circuits.

Application Fields

TVS devices are widely used within the electronics industry, providing transient over-voltage protection for circuits. The MXPLAD30KP100CAE3 is designed for use in high-voltage applications such as motor control, power supplies, power electronics, industrial control systems, automotive electronic systems, and communication systems. It can protect circuits from high static voltages, fast voltage transients, and short-term over-voltages. The device is also suitable for other high voltage circuits such as snubber circuits (used for power factor correction), ESD protection (electrostatic discharge) and neutral voltage networks. In addition, these devices are also used for transient suppression in standard data-transmission lines.

Working Principle

When a large voltage spike is applied to a load, the transient voltage is typically blocked by a diode. The diode is designed to provide a high amount of current to the load when the voltage spike occurs. At the same time, the diode is able to withstand a large current surge without being damaged.The MXPLAD30KP100CAE3 uses an advanced design to provide effective protection to the load. The device consists of a ceramic substrate with a thin film of polysilicon deposited on its surface. This design provides a high level of protection from transient voltages of 30 kV.The device also features an ultra-fast recovery time. This allows the device to respond quickly to sudden voltage changes, and limits any disruption to the circuit\'s performance. The ultra-fast recovery time also helps to reduce overall power consumption and provides a higher degree of protection for the load.

Conclusion

The MXPLAD30KP100CAE3 is an effective and reliable device designed to provide protection from excess transient voltages. It can be used in a variety of high voltage applications, including motor control, power supplies, power electronics, industrial control systems, and communication systems. This advanced device uses a ceramic substrate and a thin film of polysilicon to provide effective protection from transient voltages of up to 30 kV. It also has an ultra-fast recovery time, increasing the protection of the circuit and reducing excess power consumption.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description