MXPLAD30KP60A

Voltage - Clamping (Max) @ Ipp:	96.8V
Supplier Device Package:	PLAD
Package / Case:	Nonstandard SMD
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 150°C (TJ)
Capacitance @ Frequency:	--
Applications:	General Purpose
Power Line Protection:	No
Power - Peak Pulse:	30000W (30kW)
Current - Peak Pulse (10/1000µs):	312A
Series:	Military, MIL-PRF-19500
Voltage - Breakdown (Min):	66.7V
Voltage - Reverse Standoff (Typ):	60V
Unidirectional Channels:	1
Type:	Zener
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Transient Voltage Suppression (TVS) Diodes are commonly used to protect sensitive electrical equipment from high voltage transients. These devices are typically installed at power entry, downstream of other protection devices, and serve to absorb transient energy. Diodes, such as the MXPLAD30KP60A, are designed for use in applications where protection from transients, ESD, and electrical overstress is required. In this article, we will look at the application field and working principle of the MXPLAD30KP60A Transient Voltage Suppression (TVS) Diode.

Construction and Operation of the MXPLAD30KP60A

The MXPLAD30KP60A TVS Diode is constructed of a tightly-packaged array of crystals connected in a series, and is capable of protecting sensitive electronic circuits from high voltage transients. This type of diode is composed of two series of crystals. The first series, known as the pads, is composed of three low voltage crystals. These crystals provide low resistance for low voltage electrical energy. This series is often referred to as the active clamp. The second series, known as the trigger electrodes, is composed of five crystals connected in a series. When the voltage across the trigger electrodes exceeds a set level, the trigger crystals will trigger the second series of crystals. This series is often referred to as the trigger clamp.When there is no transient voltage present, the active clamp of the MXPLAD30KP60A will conduct little electrical current. However, when a transient voltage is present, the trigger clamp will trigger and allow electrical current to flow through the pads. The electrical current will then be absorbed by the MXPLAD30KP60A, protecting the sensitive electronic components from damage. The greater the transient voltage, the greater the electrical current.

Application

The MXPLAD30KP60A Transient Voltage Suppression (TVS) Diode is commonly used for protection in a variety of applications. It is particularly suitable for protecting sensitive electronic components from electrostatic discharge (ESD), and electrical overstress (EOS). This diode can also be installed at power entry, downstream of other protection devices. The MXPLAD30KP60A is most commonly used to protect telephone systems, cell phone networks, computers, audio systems or any device or system that may be exposed to sudden or transients. Additionally, this diode is used in a variety of automotive applications, such as vehicle wiring systems, instrumentation, and ECUs.

Conclusion

The MXPLAD30KP60A Transient Voltage Suppression (TVS) Diode is a powerful tool for protecting electronic equipment from sudden power surges or transients. This diode is composed of two series of crystals; the pads, which are designed for low voltage, and the triggers, which trigger the diode when the voltage exceeds a certain level. The MXPLAD30KP60A is most commonly used for protection of telephone systems, cell phone networks, computers, audio systems, automotive wiring, instrumentation, and ECUs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description