MXPLAD6.5KP10CAE3 Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Transient Voltage Suppressors (TVS) diodes, such as the MXPLAD6.5KP10CAE3, are used to protect electronic equipment from electrostatic discharges (ESD) and other transient voltage surges. These components are installed in-between the protected device and the power source, helping to block and dissipate potentially damaging electrical surges. The MXPLAD6.5KP10CAE3 is an example of a unidirectional, bidirectional, and bidirectional unidirectional TVS diode, meaning it can be used to protect circuits from both positive and negative voltage transients.

These TVS diodes offer protection from transients by clamping them to a certain voltage level, usually 5 volts, and dissipating any electrical energy beyond this threshold in the form of heat. When the junction of the diode reaches this voltage threshold, it clamps the transient and redirects the current to the diode’s anode and cathode, thus preventing the surge from any further damage. This technique is often referred to as voltage regulatory protection, or clamping.

The MXPLAD6.5KP10CAE3 diode is constructed from low capacitance silicon junction field effect transistors (FETs). These transistors produce a low capacitance characteristic, which helps prevent disruption to sensitive electronic components and circuits. The FETs’ patent pending RSFET architecture helps improve ESD protection and enables the diode to be used in fast rise time transient applications.

The MXPLAD6.5KP10CAE3 is typically used in consumer electronics applications such as LCD and Plasma TVs, DVD players, car stereos, and other household electronics. It is also used in computer and telecom equipment, such as motherboards, modems, switches, routers, and hubs. The lower capacitance is conducive to faster signal propagation, enabling the MXPLAD6.5KP10CAE3 TVS diode to be used in applications such as signal and data line protection. The device is also used in battery packs to protect against unnecessary battery drain.

The compact size of the MXPLAD6.5KP10CAE3 makes it a great choice for integrating protection within limited space applications. The device is available with a standing pin or a surface mount option, with an operating temperature range of -55°C to 175°C. Boasting a peak pulse power of 6.5 kilowatts and a maximum response time of 10 nanoseconds, the MXPLAD6.5KP10CAE3 is well suited for a wide range of transient protection applications.

The specific data is subject to PDF, and the above content is for reference