MY4-DC24-EL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power relays come in many shapes and sizes and are used for a wide variety of applications. MY4-DC24-EL, a power relay with a current rating of over 2 Amps, is one of the most commonly used relays in the industry. MY4-DC24-EL is primarily used for switching high-current loads up to 10 Amps. This makes it ideal for use in a wide range of industrial and commercial applications such as industrial motor starter circuits, motor control, heavy-duty pump control, and lighting control. The MY4-DC24-EL is a 5-pin relay and has a contact rating of 5A, under the strain of 400V. This relay has a built-in diode that provides a protection against over-heating and overheating, and allows for continuous switching up to 10 Amp. It also has the added benefit of a LED indicator that gives an indication if the contacts are energized or not.The MY4-DC24-EL has two basic configurations, its standard and alternate coil configuration. The standard configuration has a 12 Volt DC coil, whereas the alternate coil configuration has a 24 Volt DC coil. In both configurations, the MY4-DC24-EL is designed to enable its contacts to close or open rapidly. This helps reduce the arcing or sparking that usually occurs when switching high-current electrical loads. To operate the MY4-DC24-EL, a DC power source is necessary to provide a voltage that is equal or greater than the rated coil voltage. When the required voltage is applied, the relay will be energized and the contact will switch instantly. When the power source is removed, the relay will de-energize and the contact will switch back to their original setting. The MY4-DC24-EL also has the option to be wired in parallel in order to increase its current-carrying capacity. This is done by connecting the contactor of several MY4-DC24-EL relays together in series. By wiring in parallel, larger loads can be switched more effectively. In summary, the MY4-DC24-EL is a power relay that is used for switching high-current loads up to 10 Amps. It is designed to allow its contacts to close or open rapidly, and has the added benefits of a built-in diode or LED indicator. It also can be wired in parallel to increase the current-carrying capacity. MY4-DC24-EL is ideal for a wide range of industrial and commercial applications.

The specific data is subject to PDF, and the above content is for reference