Allicdata Part #: | MZ2029-601Y-ND |
Manufacturer Part#: |
MZ2029-601Y |
Price: | $ 0.01 |
Product Category: | Filters |
Manufacturer: | Bourns Inc. |
Short Description: | FERRITE BEAD 600 OHM 0805 1LN |
More Detail: | N/A |
DataSheet: | MZ2029-601Y Datasheet/PDF |
Quantity: | 1000 |
4000 +: | $ 0.01310 |
Series: | MZ |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Filter Type: | Power, Signal Line |
Number of Lines: | 1 |
Impedance @ Frequency: | 600 Ohms @ 100MHz |
Current Rating (Max): | 100mA |
DC Resistance (DCR) (Max): | 400 mOhm |
Ratings: | -- |
Operating Temperature: | -55°C ~ 125°C |
Package / Case: | 0805 (2012 Metric) |
Mounting Type: | Surface Mount |
Height (Max): | 0.043" (1.10mm) |
Size / Dimension: | 0.079" L x 0.047" W (2.00mm x 1.20mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
.Ferrite Beads and Chips are small pieces of material used in electronic devices and consumer products. These components are used to reduce electrical noise, reduce interference from external sources, or to improve the signal strength of an electronic device. The MZ2029-601Y is a common type of Ferrite Bead or Chip used in a variety of applications.
MZ2029-601Y Ferrite Beads are made of epoxy material and measure just 4 by 1 millimeters. These Beads and Chips feature a low DC resistance and high inductance, making them suitable for a variety of applications. They are commonly used in Telecom infrastructure, Cellular Base stations, CATV products, Power Line Communication equipment, and other consumer electronics.
MZ2029-601Y Ferrite Beads and Chips are primarily used to reduce electromagnetic interference. The ferrite material of these Beads and Chips helps to absorb electrical noise from sources such as high frequency radiation from LED, mobile phone, and the like. These Beads and Chips also help to reduce the mutual and self-interference between components of an electronic system. They also help to reduce power loss by providing a moderate impedance load on the power source.
The working principle of the MZ2029-601Y Ferrite Beads and Chips is based on the Faraday’s law of induction. According to this law, when a varying current runs through a conductor, a magnetic field is produced around the wire. This magnetic field induces electrical currents in nearby conductors, which can cause interference. The ferrite material of the MZ2029-601Y transforms these undesired currents into small amounts of heat, thus reducing interference.
In addition to reducing interference, the MZ2029-601Y also helps to improve the signal level of the electronic device. This is done by adding a small amount of inductance to the circuit. The inductance helps to reduce the voltage drop of the circuit, thus increasing the signal power at the output end. This can be useful in applications where improved signal clarity is desired.
The MZ2029-601Y is a versatile Ferrite Bead and Chip, suitable for a variety of noise reduction and signal boosting applications. It has a low DC resistance and high inductance, and helps to reduce electromagnetic interference and improve the signal level of an electronic device.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
MZ2029-601Y | Bourns Inc. | 0.01 $ | 1000 | FERRITE BEAD 600 OHM 0805... |
MZ2029-102Y | Bourns Inc. | 0.0 $ | 1000 | FERRITE BEAD 1 KOHM 0805 ... |
MZ2029-152Y | Bourns Inc. | 0.0 $ | 1000 | FERRITE BEAD 1.5 KOHM 080... |
MZ2029-202Y | Bourns Inc. | 0.0 $ | 1000 | FERRITE BEAD 2 KOHM 0805 ... |
V15T16-MZ200A05-01 | Honeywell Se... | 0.0 $ | 1000 | BASIC SWITCH V BASICS V15 |
MZ2029-601T | Bourns Inc. | 0.01 $ | 1000 | FERRITE BEAD 600 OHM 0805... |
V15T16-MZ200 | Honeywell Se... | 0.97 $ | 1000 | BASIC SWITCH V BASICS V15 |
FERRITE BEAD 150 OHM 1206 1LN
FERRITE BEAD 60 OHM 0402 1LN
FERRITE BEAD
FERRITE BEAD
FERRITE BEAD
FERRITE BEAD