N3314-2003RB Datasheet/PDFN3314-2003RB is a type of rectangular header connector with male pins. This type of connector is used in a variety of applications, such as PCB boards, circuit boards, and ICs.
N3314-2003RB is a three-pin header connector with four contacts. One contact on each side of the connector provide the connection for two pins, while the other two contacts on the bottom of the connector provide connection for the third pin. This type of connector is commonly used in embedded systems, such as robotics and sensors, in order to provide flexible connections between components.
In order to establish a connection between the N3314-2003RB header connector and the component it is connected to, the header connector must be soldered into the circuit. Depending on the specific model of connector, process may vary slightly, but the general soldering process is as follows:
- Secure the component directly against the connector using a heat sink or a soldering iron stand-off.
- Ensure that the connections are correct and that the heat sink is in good contact with the component.
- Apply the solder paste on the top surface of the component.
- Apply the pre-tinned copper wires onto the top surface of the component.
- Simultaneously move the iron and the wires across the component surface, while keeping temperature low (around 400°F/200°C).
- Once the connection is completed, remove the heat sink from the component.
The soldering process may vary slightly, depending on the specific model of connector. It is important to read the connector datasheet before attempting to solder the connector.
Once the connection between the N3314-2003RB header connector and the component it is connected to is established, the connection is held in place by the mechanical tension from the two screws on each side of the connector. This results in a reliable connection with minimal vibration or movement.
N3314-2003RB header connectors are suitable for a variety of applications, ranging from PCB boards and circuit boards to ICs. When properly installed and soldered, these connectors provide a reliable and secure connection for a variety of components.