NC20M00333JBA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Temperature sensors measure the temperature of an environment or a process. They are essential components for process automation and control systems. The NC20M00333JBA is an NTC (Negative Temperature Coefficient) thermistor. This type of component has a variable resistance that changes with temperature. The NC20M00333JBA has 10KOhm resistance at 25℃ and is an excellent accuracy temperature measurement device for a wide range of industrial process and automation applications.

NTC thermistors are thermally sensitive resistors that exhibit a decrease in resistance with increasing temperature. They are made from a semiconductor material that has been sintered with metal oxides to form a matrix. The sintering process causes an electrical insulating layer to form between metal atoms in the ceramic structure, resulting in a decrease in resistance as the temperature increases. The NC20M00333JBA is an NTC thermistor with a 10KOhm resistance at 25℃ and a negative temperature coefficient of -2.4%.

The NC20M00333JBA is a highly reliable temperature sensor with excellent accuracy. Its 10KOhm resistance at 25℃ makes it suitable for a wide range of industrial and automation applications. It can be used to measure temperatures ranging from -40°C to +200°C with an accuracy of ± 0.45°C, making it an excellent choice for temperature measurement applications such as process water, process air, automotive HVAC systems, and industrial equipment.

The NC20M00333JBA thermistor consists of an epoxy encapsulated block with two wire leads. It is corrosion and humidity resistant and has a long shelf life. Due to its small size, the thermistor can be used in tight spaces. It also has good noise immunity and a low thermal response time. It can be used with various types of controllers including 4-20mA, 0-10V, and thermocouple.

The NC20M00333JBA has a wide range of application areas, including process automation, robotics, HVAC, telecommunications, pressure transducers, medical equipment, and automotive components. It can be used as a temperature sensor in heaters, ovens, refrigerators, air conditioning systems, and other systems where precise temperature measurement is essential.

The working principle of the NC20M00333JBA is based on the change in resistance that occurs with temperature changes. As the temperature increases, the resistance of the thermistor decreases. This can be measured using a voltage divider circuit or a Wheatstone bridge connected to a temperature controller. The controller can then send a signal to a device or system to regulate or turn off the system based on the temperature reading.

In summary, the NC20M00333JBA is a 10Kohm highly accurate NTC thermistor with a negative temperature coefficient. It has a wide range of applications in process automation, robotics, HVAC, telecommunication, pressure transducers, and automotive components. Its small size and good noise immunity make it suitable for use in tight spaces. The working principle of the NC20M00333JBA is based on the resistance change of the thermistor as the temperature of the environment changes.

The specific data is subject to PDF, and the above content is for reference