NC6-P108-04

Series:	NC6, Buchanan
Packaging:	Bulk
Part Status:	Active
Terminal Block Type:	Barrier Block
Number of Circuits:	4
Number of Wire Entries:	4
Pitch:	0.375" (9.53mm)
Number of Rows:	1
Current Rating:	20A
Voltage Rating:	300V
Wire Gauge:	12-22 AWG
Top Termination:	Screws with Captive Plate
Bottom Termination:	PC Pin
Barrier Type:	2 Wall (Dual)
Features:	--
Color:	Black
Terminal Screw Material:	Steel
Terminal Screw Finish:	Zinc
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 105°C
Material - Insulation:	Polyamide (PA), Nylon
Material Flammability Rating:	UL94 V-0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks, also known as terminal boards or strips, are a type of electronic connection device. Among them, barrier blocks are a kind of terminal blocks, which have independent insulation barriers and are often used in electric cabinets with high power density. NC6-P108-04 terminal blocks are a type of barrier blocks, which are widely used.NC6-P108-04 barrier blocks are constructed of two separate parts: a terminal block and a back panel. The terminal block is connected to the back panel with four screws. The upper and lower parts of the terminal block are both insulated and connected by a screw in the center. The upper insulation protects the metal contact from shorting with the terminal block body, while the lower insulation prevents the device from electrical arcing.The NC6-P108-04 terminal block has a combined insulation rating of 1150 volts and 16 amperes. It is suitable for 60/75 ℃ high-temperature wire or other wire of relatively small diameter. With a detachable plug-in twin-conductor socket, it can quickly and safely pull out a signal circuit from the device, reduce the possibility of faulty operation, and improve the working efficiency of the electric control system.The working principle of the NC6-P108-04 terminal block is relatively simple. The two pin terminals are connected by a copper bar, and the copper bar needs to be tightened by a screw on the terminal block. The loose connection will cause the terminal block to have obvious resistance during operation, which will limit the current flow and delay the completion of some work. After the screw is tightened, the terminal block has inductance. In this way, the voltage drop at both ends of the terminal block can be reduced, so that it can be better adapted to the high-voltage connection of the device.In summary, NC6-P108-04 terminal blocks are barrier blocks with a combined insulation rating of 1150 volts and 16 amperes, and a detachable plug-in twin-conductor socket, which makes these terminal blocks suitable for high-temperature wires of small diameters. Its working principle is relatively simple: the two pin terminals are connected by a copper bar, and the copper bar needs to be tightened by a screw on the terminal block, which will reduce the voltage drop at both ends of the terminal block and better adapt it to the high-voltage connection of the device.

The specific data is subject to PDF, and the above content is for reference