NC7SP125L6X

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic is the foundation of the modern digital world. It describes the behavior of a system and is used to control the flow of information, signals, and data within the system. Buffers, drivers, receivers, and transceivers are essential components of the digital system. NC7SP125L6X is a multi-function logic device which integrates five-component functions into one device. This article describes the application field and working principle of NC7SP125L6X.

Application Field:

NC7SP125L6X has five main functions which are buffer, driver, receiver, transceiver, and demultiplexer. It can be widely used in various digital systems, such as computers, telecommunications, industrial control, automatic testing system, etc. It can be used for switching circuits, input/output ports, gateways, as well as for reinforcing a weak signal to make it able to receive or transmit faraway.

Working Principle:

NC7SP125L6X operates through logic gates, which can be considered as on/off switches. When a logic one is applied to the input, the output of the gate will turn to logic one; when a logic zero is applied to the input, the output of the gate will turn to logic zero. It can only react to two different inputs and cannot interpret multiple states of digital signals, thus it\'s called a digital device. The device can also interpret the incoming inverted digital signals, thanks to the inverter/comparator inside.

Buffer:

A buffer is a logic gate that stores the digital signal. It receives an input signal, stores it in its internal logic state, and then transmits it to the output without any delay or distortion. NC7SP125L6X’s buffer circuit consists of an inverter, a fan-out buffer, and several same buffers. The fan-out limits the amount of load the buffer can drive; the same buffers are used as reinforcement for weaker signals for long transmissions.

Driver:

A driver is a logic gate that receives a digital signal and output a strengthened high-speed version of the signal. It helps minimize the signal distortion and noise during the transmission process, allowing for a cleaner signal for further logic operation. The driver of NC7SP125L6X consists of two non-inverting buffers. It can drive two equivalent loads simultaneously and is suitable for multiplexing and demultiplexing applications.

Receiver:

A receiver is a logic gate that receives a digital signal and detect if it is a logic one or a logic zero. It has hysteresis of the input, which differs from the threshold voltage and it helps making the receiver more sensitive, especially in the receivers of weak signals. The receiving circuit of NC7SP125L6X consists of an open-drain Schmitt trigger, a reference voltage converter and a feedback circuit. It rectifies a received signal, cleans it and then transmits it as a logical output output.

Transceiver:

A transceiver is a combination of a transmitter and a receiver. It is able to simultaneously receive and transmit digital signals over multiple lines. NC7SP125L6X’s transceiver circuit consists of a quad 3-state buffer and a bidirectional tristate buffer. The 3-state buffers allow the device to output a logic high, logic low, and high-impedance states on its output lines, which makes it more suitable for multiple-chip communication and digital signal management.

Demultiplexer:

A demultiplexer is a logic gate that takes one digital signal as an input and can output it to multiple outputs. NC7SP125L6X’s demultiplexer circuit consists of a single 3-state buffer which is used as a data inversion switch. The output enables the data inversion and the data is switched between two different logic states when enabled by a logic high on the enable line.

NC7SP125L6X is a multi-function logic device that combines the functions of buffer, driver, receiver, transceiver and demultiplexer into one device. It provides fast and clean transmission of digital signals, and has wide applications in different digital systems.

The specific data is subject to PDF, and the above content is for reference