NC7SP14P5X Integrated Circuits (ICs)

Package / Case:	5-TSSOP, SC-70-5, SOT-353
Base Part Number:	7SP14
Series:	7SP
Packaging:	Tape & Reel (TR)
Part Status:	Active
Logic Type:	Inverter
Number of Circuits:	1
Number of Inputs:	1
Features:	Schmitt Trigger
Voltage - Supply:	0.9 V ~ 3.6 V
Current - Quiescent (Max):	900nA
Current - Output High, Low:	2.6mA, 2.6mA
Logic Level - Low:	0.1 V ~ 0.6 V
Logic Level - High:	0.6 V ~ 2.6 V
Max Propagation Delay @ V, Max CL:	9.2ns @ 3.3V, 30pF
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Supplier Device Package:	SC-70-5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

What Is NC7SP14P5X?

NC7SP14P5X is a logic level, low power, 14-pin, single-pole double-throw (SPDT) switch utilizing Schottky diode and Low Input Offset Voltage High slew rate, CMOS operational amplifier (Op-Amp). The device is designed to provide superior on-off and polarization performance and is used in a variety of applications such as protecting the input pins of operational amplifiers, wide-band analog-to-digital (A/D) converters, buffer amplifiers, logic and micro-controller-based systems.

Applications of NC7SP14P5X

The NC7SP14P5X is especially suitable for low-impedance switching applications, as well as for high-current or high-power applications. It is typically used as a power switch for analog or digital systems, video switching, automotive applications and in test and measurement equipment. Examples include:

• Power MOSFET switches
• Analog chip selectors and digital bus switches
• DC/DC converters
• Notch filters
• Switchable AC-DC splitters
• Data transmission networks
• Relay switches
• Robotic controllers
• Automotive voltage regulators and power sources
• Remote sensing systems
• Test and measurement equipment

Features of NC7SP14P5X

The NC7SP14P5X is capable of operating from very low power levels up to 6.5V at the input. It is available in the standard dual or single package, in both topside or bottomside mount mounting types, with or without thermal protection. NC7SP14P5X is characterized by its low on-state impedance and its fast turn-on and off times which allow for excellent signal transitions. Its Schottky diode adds protection against load-induced overshoot currents.NC7SP14P5X also features low consumption DC current of 0.6mA, a fast rise and fall time of 17ns and a low voltage drop of \<50mV. The low Input Offset Voltage (IOV) of the CMOS Op-Amp provides superior output accuracy and excellent dynamic performance, allowing relatively high-bandwidth signals to be switched with minimal power dissipation.

Working Principle of NC7SP14P5X

The working principle of NC7SP14P5X is based on an open-drain connection. An open-drain connection simply connects two or more pins, allowing any one of the input pins to be in a low state, activating the output device, like an LED or a motor. When an input voltage is applied to the device, it converts the voltage to a logic level, in which logic 0 is represented by a Low State and logic 1 is represented by a High State, allowing for clear and stable switching. When no input voltage is applied to the device, the output is said to have a 0-state, which is represented by a low (“Off”) output. When an input voltage is applied to the device, the output will depend on the voltage value provided, but usually follows a “High” state. When the voltage is removed, the output will revert to the 0-state. The NC7SP14P5X is designed to provide an extremely low voltage drop, enabling excellent on-off and polarization performance. The device features an onboard Schottky Diode, which adds protection against load-induced overshoot currents. The combination of the low voltage drop and the high slew rate of the CMOS Op-Amp allows the NC7SP14P5X to provide superior switching capabilities for many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description