NCM6D1205C

Current - Output (Max):	600mA, 600mA
Control Features:	Enable, Active Low
Size / Dimension:	1.26" L x 0.79" W x 0.43" H (32.0mm x 20.0mm x 10.8mm)
Package / Case:	23-DIP Module, 7 Leads
Mounting Type:	Through Hole
Efficiency:	83%
Operating Temperature:	-40°C ~ 85°C
Features:	Remote On/Off, OTP, SCP, UVLO
Applications:	ITE (Commercial), Medical
Voltage - Isolation:	5.2kV
Power (Watts):	6W
Series:	NCM6
Voltage - Output 3:	--
Voltage - Output 2:	-5V
Voltage - Output 1:	5V
Voltage - Input (Max):	36V
Voltage - Input (Min):	9V
Number of Outputs:	2
Type:	Isolated Module
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are power supply circuits in which the input supply voltage is different from the output or load voltage. It converts direct current (DC) from one voltage level to another. It is often used to convert a higher voltage to a lower voltage. One example of a DC-DC converter is the NCM6D1205C.

The NCM6D1205C is a type of synchronous buck converter. It is a stand-alone, step-down DC-DC converter that is capable of providing up to 12 A of continuous current and up to 5 V of output voltage. It has a wide input voltage range of 4.5 V to 14 V and operates with input/output voltages from 1.5 V to 5 V. It has a high efficiency level of 96.4% at 12 V input voltage and a 4.5 V output voltage. In addition, it features an enable/disable pin, current limit protection, short-circuit protection, over-temperature protection, and over-voltage protection.

The NCM6D1205C has a number of applications. It is typically used in consumer electronics, laptops, power supplies, and other portable devices. It is ideal for applications that require a reliable and flexible power source. It is also suitable for a variety of aerospace and military applications due to its high efficiency level.

The working principle of the NCM6D1205C is based on the Buck Converter. It is a type of DC-DC switching converter where it draws current from the input voltage source and ramps up the current. The input current is then switched by an N-MOSFET in a transistors switch frequency that, in turn, is regulating to control the output voltage. The output voltage is then filtered by an inductor and a diode to obtain the desired output voltage of the DC-DC converter.

The NCM6D1205C is a reliable and efficient DC-DC converter that has a wide range of applications. It is used in a variety of consumer electronics, laptops, power supplies, and portable devices. It has a high efficiency level of 96.4% at 12 V input voltage and a 4.5 V output voltage. It is also suitable for a variety of aerospace and military applications due to its high efficiency level. In addition, it features an enable/disable pin, current limit protection, short-circuit protection, over-temperature protection, and over-voltage protection. Its working principle is based on the Buck Converter which draws current from the input voltage source and uses an N-MOSFET to switch it and regulate its output voltage.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description