NCN1154MUTAG Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The NCN1154MUTAG is an analog switch designed specifically for special applications. It is a single pole, double throw switch with a low contact resistance of 5 ohms and a high power transfer of 3.2 watts. The NCN1154MUTAG is widely used for switching between two different analog signals or voltages. It can also be used to switch between two different digital signals or levels.

The NCN1154MUTAG uses a combination of a P-channel and N-channel field effect transistors (FETs). The P-channel FET is used to control a switch between two signal sources. The signal source can be either a voltage or a current source. The signal source is connected to the gate of the P-channel FET. The signal source can also be connected in series with the gate of the P-channel FET for higher voltage applications. When the P-channel FET is on, the signal source flows through the N-channel FET from the drain to the source.

The NCN1154MUTAG also includes two isolation barriers, which keep the gate of the P-channel FET and the drain of the N-channel FET from being directly connected. The isolation barriers prevent current from flowing between the two signals, allowing for independent control of the two signals. The isolation barriers also reduce the capacitance between the two signals, allowing for faster switching times.

The NCN1154MUTAG is ideal for applications such as signal switching in audio and video circuits, level shifters in off-line power supplies, signal buffering, and audio/video signal routing. It is also ideal for general purpose switching applications, such as switching between different battery sources, switching between different voltage levels, and switching between different digital logic levels.

The NCN1154MUTAG is designed to meet the requirements of a multitude of different applications and environments. The maximum power dissipation of the NCN1154MUTAG is 3.2 watts, and it is capable of operating from a low voltage of 4.5Volts. The device is also device is resistant to electrostatic discharge, making it suitable for both industrial and consumer applications. It is ESD rated to withstand up to 8kV of ESD on all leads.

The NCN1154MUTAG is an ideal choice for applications requiring stable, reliable and low power analog switches. It offers a low ON-resistance and high performance with a wide range of operating voltages and is ideal for switching between two different analog signals or voltages, or between two different digital signals or levels, in an isolated and reliable manner.

The specific data is subject to PDF, and the above content is for reference