NCP4588DSQ25T1G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

NCP4588DSQ25T1G Application Field and Working Principle

NCP4588DSQ25T1G is a highly efficient, low input voltage, fast response, low quiescent current step-up voltage regulator in the linear voltage regulator family. It is packaged in a miniature 2-pin SOT-23, providing guaranteed capability over a -40℃ to +125℃ temperature range.

The NCP4588DSQ25T1G has a number of features which make it ideal for a variety of applications, including charging small batteries, energy harvesting, DC/DC conversion, powering light-emitting diodes (LEDs), providing regulated voltages to microcontrollers, providing bias voltage to RF transmitters or receivers and providing multiple regulated voltages for mixed signal systems.

Features

• High Efficiency at Light Loads: The efficiency effectively remains constant under light load conditions, resulting in minimal power dissipation.
• Minimum Input Voltage: The minimum input voltage is 0.85V, so it can be used with 3V and 1.5V batteries.
• Fast Response Time: The NCP4588DSQ25T1G is capable of responding quickly to a wide range of input voltages.
• Low Quiescent Current: The quiescent current of the NCP4588DSQ25T1G is only 10μA at 10mA output, leading to extended battery life.
• Minature SOT-23 package: The NCP4588DSQ25T1G is housed in a 2-pin SOT-23 package, which is ideal for space-constrained applications.

Applications

• Charging small batteries
• Energy harvesting
• DC/DC conversion
• Lighting control
• Powering LEDs
• Providing regulated voltages to microcontrollers
• Providing bias voltage to RF transmitters or receivers
• Providing bias voltage to drive analog circuits
• Providing multiple regulated voltages for mixed signal systems

Working Principle

The NCP4588DSQ25T1G is a step-up voltage regulator . It works by converting a DC voltage from a low input voltage to a higher, regulated output voltage. The conversion is done using a pulse width modulation (PWM) circuit, which is triggered by an enable signal. The PWM circuit then varies the width of the pulses according to the desired output voltage. When the enable signal is triggered, the pulse width modulation (PWM) circuit is activated, and it outputs a series of pulses with varying widths, which are proportional to the desired output voltage. This voltage is then amplified to the desired output voltage by an error amplifier and a control circuit. The amplified voltage is then regulated by the feedback circuit. The resulting output voltage is a regulated and consistent voltage, regardless of the changes in the input voltage.

The PWM circuit is driven by an oscillator, which controls the frequency of the output pulses and is adjustable, depending on the application. In addition, the PWM circuit includes a synchronization circuit, which allows the converter to synchronize with an externally applied clock. The NCP4588DSQ25T1G also incorporates two additional features, both of which help reduce power losses in the circuit.

Conclusion

The NCP4588DSQ25T1G is a highly efficient, low input voltage, fast response, low quiescent current step-up voltage regulator in the linear voltage regulator family. It is highly suitable for a variety of applications such as charging small batteries, providing regulated voltages to microcontrollers, powering LEDs, and providing multiple regulated voltages for mixed signal systems. Through its use of pulse width modulation (PWM) circuit, error amplifier and feedback circuit, the NCP4588DSQ25T1G is able to regulate voltage even when input voltage changes. As such, it is a highly reliable and efficient choice for many applications.

The specific data is subject to PDF, and the above content is for reference