NCP6922CDMTTXG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC - Voltage Regulators - Linear + Switching are a type of integrated circuit (IC) primarily used for regulating power in embedded systems. The NCPS6922CDMTTXG is a high performance linear voltage regulator that combines a wide variety of switching, linear and protection technologies. The NCPS6922CDMTTXG is designed to provide low output noise and fast transient response while consuming low quiescent current.

The NCPS6922CDMTTXG\'s key features include: an integrated high voltage efficient DC/DC converter, a high power factor, a high temperature range of up to 200°C, a wide input voltage range of 4.3V to 26V and low power consumption. It is available in both fixed and adjustable voltage configurations.

The NCPS6922CDMTTXG supports a wide range of output power levels from 200mV to 75V and output current ratings from 10mA to 30A. It can be used to provide regulated supply voltages for most types of logic ICs, including ASICs, CPLDs and micro-controllers. The NCPS6922CDMTTXG is also suitable for powering high power LED drivers, high power stepper drivers, and motor drivers.

The working principle of the NCPS6922CDMTTXG is based on the principle of voltage regulation. It takes an incoming unregulated DC supply voltage and converts it into a regulated supply voltage by using a combination of linear and switching regulator techniques. The switching regulator section of the NCPS6922CDMTTXG consists of an internal voltage regulation loop and a power MOSFET switch. The regulative loop measures the input voltage and compares it to a programmable reference voltage. This reference voltage is set to the desired output voltage. If the input voltage is greater than the reference voltage, the internal regulator turns on the power MOSFET switch, dropping the input voltage to match the reference voltage. If the input voltage is lower than the reference voltage, the internal regulator turns off the power MOSFET switch, increasing the input voltage to match the reference voltage.

The linear regulator section of the NCPS6922CDMTTXG is composed of an internal voltage regulator IC (VRIC) and a series of internal references and voltage dividers. The VRIC monitors and attempts to maintain the output voltage at a level equal to the reference voltage. The VRIC senses the output voltage at the output and adjusts the reference voltage until they match. If the output voltage drops below the reference voltage, the VRIC increases the reference voltage until it matches the output voltage.

The power MOSFET switch is controlled by the linear regulative loop of the NCPS6922CDMTTXG in order to provide a fast response time for load transients and also to maintain a low output noise level. The MOSFET switch is a fast-switching P-channel enhancement-mode type, which is capable of carrying up to 30A at a switching frequency of up to 500kHz.

The NCPS6922CDMTTXG is a High Efficiency Fixed Output, Low-Dropout (LDO) Regulator ideal for various telecommunications, industrial, and consumer applications. It offers high power density, low power consumption and fast transient response making it ideal for applications such as micro-controllers, FPGAs, ASICs, as well as energy efficient AC/DC power supplies and LED lighting systems.

The specific data is subject to PDF, and the above content is for reference