Allicdata Part #: | NDC3105LT1-ND |
Manufacturer Part#: |
NDC3105LT1 |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | ON Semiconductor |
Short Description: | IC RELAY DRIVER SOT-23 |
More Detail: | N/A |
DataSheet: | NDC3105LT1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Supply (Vcc/Vdd): | -- |
Base Part Number: | NDC3105 |
Supplier Device Package: | SOT-23-3 (TO-236) |
Package / Case: | TO-236-3, SC-59, SOT-23-3 |
Operating Temperature: | -- |
Fault Protection: | -- |
Features: | -- |
Input Type: | -- |
Rds On (Typ): | -- |
Current - Output (Max): | -- |
Series: | -- |
Voltage - Load: | -- |
Interface: | -- |
Output Type: | -- |
Output Configuration: | -- |
Ratio - Input:Output: | -- |
Number of Outputs: | -- |
Switch Type: | -- |
Part Status: | Obsolete |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The NDC3105LT1 is a Power Distribution Switches, Load Drivers and is ideal for use in applications such as motor/actor control, memory guarding and automotive audio system control.
The NDC3105LT1 is a low-side load switch that provides fast switching between high and low states. It is a single pole, double throw (SPDT) switch that is opto-isolated from the control signal. It is, additionally, dynamically balanced, allowing for optimal current flow through the load. The switch provides a fixed ON and OFF resistance, which reduces heat dissipation in the load. This switch is a standalone unit, and does not require any external components for its operation.
The control signal input for the NDC3105LT1 is an open drain logic signal. Upon receiving the signal, the switch is turned on or off, as determined by the signal. The switch can also be disabled, either by an active-low signal or by holding the input pin at high-impedance state. The NDC3105LT1 contains an integrated ESD protection to protect the signal integrity.
The NDC3105LT1 offers enhanced sensing and diagnostics functions with its Fault Detection Architecture (FDA). This function monitors the voltage at the output and provides feedback to the system when a fault is detected. The sensing limit for the NDC3105LT1 is 1.4V, with a 0.1V tolerance. The switch can also detect open load conditions and provide an active low signal in case of such a failure.
The NDC3105LT1 has a quiescent power of 22μA at +12V and allows a continuous load current of up to 17A, with a peak load current of 25A. It has an operating temperature range between -40°C and +125°C, and is qualified under the AEC-Q100 standard.
Overall, the NDC3105LT1 is an ideal choice for use in applications such as motor/actor control, memory guarding and automotive audio system control. Its fast switching, dynamic balance, and control signal isolation make it an attractive choice for a wide range of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
NDC3105LT1G | ON Semicondu... | 0.11 $ | 1000 | IC RELAY DRIVER SOT-23 |
NDC3105LT1 | ON Semicondu... | 0.0 $ | 1000 | IC RELAY DRIVER SOT-23 |
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC