NFZ32BW150HN10L Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite Beads and Chips find a very wide range of applications, with the NFZ32BW150HN10L being one of their most well-known varieties. This type of ferrite bead works as a high pass filter in different applications. This specific type of chip has many desirable characteristics which make it an ideal filter for use in high-pass electronic circuits.

To begin with, the NFZ32BW150HN10L ferrite bead is designed with an impedance of 10 Ohms. This is an important factor because a low impedance ferrite bead will allow undesired frequencies to pass through. This type of filter works best with high impedance values, therefore the 10 Ohm value of the NFZ32BW150HN10L is perfect for this application.

The NFZ32BW150HN10L ferrite bead also has a very low insertion loss. This indicates that very little power is lost in the process of filtering undesired frequencies. This is beneficial because it reduces the possibility of unwanted signals passing through the filter.

The NFZ32BW150HN10L ferrite bead has a peak-to-peak attenuation of 32 dB. This is a very important parameter because it determines the strength of the filter. The peak-to-peak attenuation determines the amount of power that is blocked from the signal. A high peak-to-peak attenuation ensures that the filter is able to reject undesired frequency signals effectively.

When it comes to its bandwidth, the NFZ32BW150HN10L ferrite bead covers a wide frequency range, from 150 KHz to 10 MHz. This is beneficial because it allows it to be used in a wide range of applications. For instance, it is often used in television and radio signal processing to filter out undesired frequency signals.

Finally, the NFZ32BW150HN10L ferrite bead has a very high self-resonance frequency. This indicates that the chip is able to filter out frequencies up to its own resonant frequency. This is desirable because higher quality filtering is achieved when the chip is able to filter out frequencies up to its own self-resonance frequency.

In summary, the NFZ32BW150HN10L ferrite bead and chip are an ideal filter for use in high-pass electronic circuits. It has an impedance of 10 Ohms, a low insertion loss, a peak-to-peak attenuation of 32 dB, a wide frequency range from 150 KHz to 10 MHz, as well as a high self-resonance frequency. These characteristics enable the NFZ32BW150HN10L ferrite bead and chip to reject undesired frequencies, ensuring that only the desired frequency signals pass through the filter.

The specific data is subject to PDF, and the above content is for reference