NHQ202B410T10

Series:	NHQ
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance in Ohms @ 25°C:	2k
Resistance Tolerance:	±10%
B Value Tolerance:	±5%
B0/50:	--
B25/50:	--
B25/75:	--
B25/85:	4100K
B25/100:	--
Operating Temperature:	-40°C ~ 125°C
Length - Lead Wire:	--
Mounting Type:	Surface Mount
Package / Case:	1206 (3216 Metric)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Temperature Sensors are devices used to measure temperature and provide a signal, typically via an electrical output, corresponding to the temperature being measured. The NTC Thermistor is one type of temperature sensor which has superior measurement range and accuracy. This is what makes it ideal for a variety of temperature-sensing applications. The NHQ202B410T10 is a popular and reliable NTC Thermistor. This article will discuss its application field and working principle.

What is NTC Thermistor?

NTC Thermistors are types of thermistors which use a negative temperature coefficient, meaning that as the temperature increases, the resistance decreases. They are typically applied in electronics and are widely used in most modern temperature-sensing applications, which is due to their good sensitivity and linearity of sensing response. This makes them an accurate and reliable form of temperature sensing.

The NHQ202B410T10

The NHQ202B410T10 is a negative temperature coefficient thermistor (NTC) with superior performance and accuracy. It is used in a variety of electronics from car engines and domestic appliances to air force and military applications. Manufactured by one of the world’s leading temperature sensor companies INF, the NHQ202B410T10 has a wide measurement range (-55°C to +150°C) and an accuracy of 0.21°C. It is also low cost and has a long lifespan, making it a very popular choice for temperature sensing applications.

Applications for the NHQ202B410T10

The NHQ202B410T10 is most commonly used for automotive and component temperature sensing such as in engine temperature monitoring, where it gives a precise reading of the environment. This is also beneficial for machines such as HVAC systems and construction vehicles, where precise temperature readings are important for efficient operation. It is also used in multimedia applications such as televisions, computers and gaming consoles where it monitors the temperature of the equipment to avoid overloading and ensure the system runs smoothly.The NHQ202B410T10 is highly beneficial for military and air force applications as it is tough and durable. It is applied in helicopter heat-sensing systems which monitor the temperature of the engine. It is also used in military camps and satellite systems as an environmental temperature-monitoring system. This ensures safety of personnel and attached equipment as high or low temperatures can cause malfunction of the devices.

Working Principle of the NHQ202B410T10

The working principle of the NHQ202B410T10 is fairly simple. It consists of a bead of NTC material which is connected to two electrical contacts, forming a complete circuit. When the thermistor is exposed to a temperature change, the NTC material either radiates or absorbs heat, which causes a change in resistance. This resistance change is then measured by a resistance-to-voltage converter, which produces an electrical output voltage corresponding to the temperature.

Conclusion

The NHQ202B410T10 is a reliable thermistor which is effective in a variety of applications. Its application fields range from automotive, military and aerospace to multimedia and component temperature-sensing. Its superior performance and accuracy make it ideal for all these applications. Furthermore, its working principle is simple and effective. The NHQ202B410T10 is an excellent choice for accurate temperature-sensing.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description